- -- This is a common MIB for Dominion KX/KSX G1, KX/KSX G2, KX G3, LX, and SX G2
- -- 10/13/2016 G. W
- -- Support get of:
- -- Port status for all ports
- -- System vitals: Memory, CPU, Power
- -- Adjust MAX-ACCESS of notification only objects.
- -- Maintenance.
- -- 07/12/2016 Y. Z
- -- notifications updated
- -- Added notification: dsamUpdateStarted
- -- Added notification: dsamUpdateCompleted
- -- Added notification: dsamConnected
- -- Added notification: dsamDisconnected
- -- 11/5/2014 G. W
- -- notifications updated
- -- Added notification: automaticScriptConfiguration
- -- Added variable: fileName
- -- SMIv2 OBJECT-TYPE (updated from SMIv1 RFC-1212)
- -- 12/20/11 H. G
- -- notifications updated
- -- Added new traps for userDisconnectedFromPort
- -- 07/08/11 H. G
- -- Corrected description for portStatusChange
- -- 12/20/10 H. G
- -- notifications updated
- -- Added new traps for scanStarted, scanStopped
- -- Also added defn for portList
- -- 03/09/10 H. G
- -- notifications updated
- -- Added new traps for securityBannerChanged, securityBannerAction
- -- Also added defn for bannerChanges, bannerAction
- -- 09/08/09 H. G
- -- notifications updated
- -- Added new traps for setDateTime, setFIPSMode
- -- Also added defn for sysDateAndTime, fipsModeStatus
- -- 10/14/08 H. G
- -- notifications updated
- -- Added new traps for userForcedLogout, userUploadedCertificate
- -- and bladeChassisCommError
- -- Also added defn for certificateAuthorityName
- -- 03/05/2008 H. G
- -- notifications updated
- -- provide additional support of notifications
- -- containing both IPv4 and IPv6 addresses
- -- Authors: P. N and S. O
- -- 01/15/2007 S. O
- -- restructured KX2.0 MIB to pass level 6 validation
- -- Import section is revised
- -- Module Identity section is revised
- -- Conformance information is added towards the end
- -- Renamed some ASN variables i.e. objectName -> rcpObjectName etc.
- -- Added 2 new traps for ipConflictDetected and ipConflictResolved
- -- Also added defn for count, new trap variable
- RemoteKVMDevice-MIB DEFINITIONS ::= BEGIN
- IMPORTS
- MODULE-IDENTITY, NOTIFICATION-TYPE,
- OBJECT-TYPE, -- GW for SMIv2 compliance and consistency
- enterprises, Integer32, Gauge32
- FROM SNMPv2-SMI
- DisplayString, DateAndTime, TruthValue
- FROM SNMPv2-TC
- MODULE-COMPLIANCE,
- NOTIFICATION-GROUP,
- OBJECT-GROUP
- FROM SNMPv2-CONF;
- -- Raritan is registered with IANA for an enterprise MIB
- raritan MODULE-IDENTITY
- LAST-UPDATED "201610131200Z"
- ORGANIZATION "Raritan Inc."
- CONTACT-INFO
- " Technical Support
- Raritan Inc.
- 400 Cottontail Lane
- Somerset, New Jersey, 08873
- E-mail: support@raritan.com"
- DESCRIPTION
- "The MIB module representing Raritan Computers'
- implementation of enterprise specific MIBs
- for KX products."
- REVISION "201610131200Z"
- DESCRIPTION
- "Version updated for added get"
- REVISION "201411061200Z"
- DESCRIPTION
- "Version updated for added support for SX G2"
- REVISION "201311011200Z"
- DESCRIPTION
- "Version updated for added support for KX G3"
- REVISION "201112201200Z"
- DESCRIPTION
- "Version updated for product release 2.5.0. Add support for Disconnect User - Force User Off"
- REVISION "201107081200Z"
- DESCRIPTION
- "Version updated for product release 2.4.5."
- ::= { enterprises 13742 }
- remoteKVMDevice OBJECT IDENTIFIER ::= { raritan 3 }
- -- GW same location as TRAPS (implied remoteKVMDevice#) so that it is compatible with the previous MIB.
- remoteKVMDeviceNotifications OBJECT IDENTIFIER ::= { remoteKVMDevice 0 }
- remoteKVMDeviceGet OBJECT IDENTIFIER ::= { remoteKVMDevice 1 }
- --******************************************************************************
- -- Data objects
- --******************************************************************************
- rcpObjectName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The model type of the device"
- ::= { remoteKVMDevice 2 }
- rcpObjectInstance OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The device name"
- ::= { remoteKVMDevice 3}
- userName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "User Name"
- ::= { remoteKVMDevice 4}
- targetUser OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The user record being operated on"
- ::= { remoteKVMDevice 5}
- groupName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The group record being operated on"
- ::= { remoteKVMDevice 6}
- rcpIPAddress OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The IP address"
- ::= { remoteKVMDevice 7}
- deviceName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "Device name"
- ::= { remoteKVMDevice 8 }
- portStatus OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "Port status and availability:
- inactive - Target cannot be detected. (UI Status:down, Availability:idle)
- available - Target can be accessed. (UI Status:up, Availability:idle)
- connected - A user is connected but capacity is available. (UI Status:up/down, Availability:connected)
- busy - Reached maximum access capacity. (UI Status:up/down, Availability:busy)"
- ::= { remoteKVMDevice 9 }
- portName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "Port Name"
- ::= { remoteKVMDevice 10 }
- clusterID OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The cluster ID of the CommandCenter managing this device"
- ::= { remoteKVMDevice 11 }
- ipPort OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The IP Port"
- ::= { remoteKVMDevice 12 }
- resetType OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "How the device reset was performed"
- ::= { remoteKVMDevice 13 }
- interface OBJECT-TYPE
- SYNTAX INTEGER { lan(1), modem(2) }
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "Interface type"
- ::= { remoteKVMDevice 14}
- ethernetInterface OBJECT-TYPE
- SYNTAX INTEGER { lan0(0), lan1(1)}
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "Ethernet Interface"
- ::= { remoteKVMDevice 15 }
- backupRestoreAction OBJECT-TYPE
- SYNTAX INTEGER { backup(0), restore(1) }
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "Backup Restore Action."
- ::= { remoteKVMDevice 16 }
- imageType OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "Image type to update."
- ::= { remoteKVMDevice 17 }
- imageVersion OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The version of the Upgrade image"
- ::= { remoteKVMDevice 18 }
- status OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The success status of an operation"
- ::= { remoteKVMDevice 19 }
- fileVersion OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The file version"
- ::= { remoteKVMDevice 20 }
- fileType OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The file type"
- ::= { remoteKVMDevice 21 }
- outletName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "Name of the power outlet."
- ::= { remoteKVMDevice 22 }
- portNumber OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "Port number"
- ::= { remoteKVMDevice 23}
- serialNumber OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "Serial Number of the Device or CIM"
- ::= { remoteKVMDevice 24}
- cimName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "Name of the cim."
- ::= { remoteKVMDevice 25 }
- count OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "A generic counter"
- ::= { remoteKVMDevice 26}
- restoredLanPort OBJECT-TYPE
- SYNTAX Integer32
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "Lan port restored after the failure"
- ::= { remoteKVMDevice 27 }
- remoteIpAddress OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The IP address of a client"
- ::= { remoteKVMDevice 28}
- oldIpAddress OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The IP address"
- ::= { remoteKVMDevice 29}
- newIpAddress OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The IP address"
- ::= { remoteKVMDevice 30}
- newNetmask OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The net mask "
- ::= { remoteKVMDevice 31}
- oldNetmask OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The net mask"
- ::= { remoteKVMDevice 32}
- oldGateway OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The Gateway ip"
- ::= { remoteKVMDevice 33}
- newGateway OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The Gateway ip"
- ::= { remoteKVMDevice 34}
- -- KSX G2 specific var Names sxAlertString, pduName
- sxAlertString OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- " Serial Alert string on a port. "
- ::= { remoteKVMDevice 38 }
- pduName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- " Name of the connected PDU "
- ::= { remoteKVMDevice 39 }
- changeEventText OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION "A configurable parameter was changed. The
- description text identifies the object changed and its new value. The format
- of the text is 'IPv 4 Parameter : parameter = new value, . IPv6 Parameter :
- parameter = new value, ..."
- ::= { remoteKVMDevice 40 }
- certificateAuthorityName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "Certificate Authority Name"
- ::= { remoteKVMDevice 41 }
- sysDateAndTime OBJECT-TYPE
- SYNTAX DateAndTime
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "The system date and time."
- ::= { remoteKVMDevice 42 }
- fipsModeStatus OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "FIPS Mode status (0-Disabled, 1-Enabled)"
- ::= { remoteKVMDevice 43 }
- bannerChanges OBJECT-TYPE
- SYNTAX INTEGER {enabled(0), disabled(1), modified(2)}
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "KX2 Banner Changes "
- ::= { remoteKVMDevice 44 }
- bannerAction OBJECT-TYPE
- SYNTAX INTEGER {declined(0), accepted(1)}
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "User Acceptance / Rejection of Initial Banner Consent"
- ::= { remoteKVMDevice 45 }
- portList OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (1..1024))
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "Port List"
- ::= { remoteKVMDevice 46 }
- fileName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS accessible-for-notify
- STATUS current
- DESCRIPTION
- "Name of the file used in the operation"
- ::= { remoteKVMDevice 47 }
- --******************************************************************************
- -- Available for retrieval (SNMP Get)
- -- Only supported on SX2.
- --******************************************************************************
- systemUsageMemory OBJECT-TYPE
- SYNTAX Gauge32 (0..100)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "Percent current memory usage"
- ::= { remoteKVMDeviceGet 1 }
- systemUsageCPU OBJECT-TYPE
- SYNTAX Gauge32 (0..100)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "Percent processor usage"
- ::= { remoteKVMDeviceGet 2 }
- systemPowerSupplyTable OBJECT-TYPE
- SYNTAX SEQUENCE OF SystemPowerSupplyEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "Status of all power supplies"
- ::= { remoteKVMDeviceGet 3 }
- systemPowerSupplyEntry OBJECT-TYPE
- SYNTAX SystemPowerSupplyEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "Power supply data"
- INDEX { systemPowerSupplyNumber }
- ::= { systemPowerSupplyTable 1 }
- SystemPowerSupplyEntry ::= SEQUENCE {
- systemPowerSupplyNumber Integer32,
- systemPowerSupplyPowerOn TruthValue
- }
- systemPowerSupplyNumber OBJECT-TYPE
- SYNTAX Integer32 (1..2)
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "System power supply identifier"
- ::= { systemPowerSupplyEntry 1 }
- systemPowerSupplyPowerOn OBJECT-TYPE
- SYNTAX TruthValue
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "Is the system power supply on (true)"
- ::= { systemPowerSupplyEntry 2 }
- portDataTable OBJECT-TYPE
- SYNTAX SEQUENCE OF PortDataEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "Retrieve data for all ports"
- ::= { remoteKVMDeviceGet 4 }
- portDataEntry OBJECT-TYPE
- SYNTAX PortDataEntry
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "Port identification and current information"
- INDEX { portDataIndex }
- ::= { portDataTable 1 }
- PortDataEntry ::= SEQUENCE {
- portDataIndex Integer32,
- portDataNumber Integer32,
- portDataName DisplayString,
- portDataType DisplayString,
- portDataStatus INTEGER
- }
- portDataIndex OBJECT-TYPE
- SYNTAX Integer32 (1..1024)
- MAX-ACCESS not-accessible
- STATUS current
- DESCRIPTION
- "table index"
- ::= { portDataEntry 1 }
- portDataNumber OBJECT-TYPE
- SYNTAX Integer32 (1..1024)
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "Physical port number"
- ::= { portDataEntry 2 }
- portDataName OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "User assigned port name"
- ::= { portDataEntry 3 }
- portDataType OBJECT-TYPE
- SYNTAX DisplayString
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "Port connection type"
- ::= { portDataEntry 4 }
- portDataStatus OBJECT-TYPE
- SYNTAX INTEGER { inactive(1), available(2), connected(3), busy(4) }
- MAX-ACCESS read-only
- STATUS current
- DESCRIPTION
- "Port status and availability:
- inactive - Target cannot be detected. (UI Status:down, Availability:idle)
- available - Target can be accessed. (UI Status:up, Availability:idle)
- connected - A user is connected but capacity is available. (UI Status:up/down, Availability:connected)
- busy - Reached maximum access capacity. (UI Status:up/down, Availability:busy)"
- ::= { portDataEntry 5 }
- --******************************************************************************
- -- Traps
- --******************************************************************************
- rebootStarted NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName
- }
- STATUS current
- DESCRIPTION
- "The reboot process has started"
- ::= { remoteKVMDeviceNotifications 1 }
- rebootCompleted NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance
- }
- STATUS current
- DESCRIPTION
- "The reboot process is complete"
- ::= { remoteKVMDeviceNotifications 2 }
- userLogin NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "A user logged in"
- ::= { remoteKVMDeviceNotifications 3 }
- userLogout NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "A user logged out"
- ::= { remoteKVMDeviceNotifications 4 }
- userAuthenticationFailure NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "A user authentication attempt failed"
- ::= { remoteKVMDeviceNotifications 5 }
- portConnect NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- portName
- }
- STATUS current
- DESCRIPTION
- "A user connected to a port"
- ::= { remoteKVMDeviceNotifications 6 }
- portDisconnect NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- portName
- }
- STATUS current
- DESCRIPTION
- "A user disconnected from a port"
- ::= { remoteKVMDeviceNotifications 7 }
- userSessionTimeout NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "A user timed out from the device"
- ::= { remoteKVMDeviceNotifications 8 }
- userConnectionLost NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "A user lost connection to the device"
- ::= { remoteKVMDeviceNotifications 9 }
- portStatusChange NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- deviceName,
- portName,
- portStatus
- }
- STATUS current
- DESCRIPTION
- "A port status has changed"
- ::= { remoteKVMDeviceNotifications 10 }
- userAdded NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- targetUser
- }
- STATUS current
- DESCRIPTION
- "A user was added to the system"
- ::= { remoteKVMDeviceNotifications 11 }
- userModified NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- targetUser
- }
- STATUS current
- DESCRIPTION
- "A user account was modified"
- ::= { remoteKVMDeviceNotifications 12 }
- userDeleted NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- targetUser
- }
- STATUS current
- DESCRIPTION
- "A user was deleted from the system"
- ::= { remoteKVMDeviceNotifications 13 }
- groupAdded NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- groupName
- }
- STATUS current
- DESCRIPTION
- "A group was added to the system"
- ::= { remoteKVMDeviceNotifications 14 }
- groupModified NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- groupName
- }
- STATUS current
- DESCRIPTION
- "A group was modified"
- ::= { remoteKVMDeviceNotifications 15 }
- groupDeleted NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- groupName
- }
- STATUS current
- DESCRIPTION
- "A group was deleted from the system"
- ::= { remoteKVMDeviceNotifications 16 }
- startCCManagement NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "The device was put under CommandCenter management"
- ::= { remoteKVMDeviceNotifications 17 }
- stopCCManagement NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "The device was removed from CommandCenter management"
- ::= { remoteKVMDeviceNotifications 18 }
- factoryReset NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "The device was reset to factory default setting"
- ::= { remoteKVMDeviceNotifications 19 }
- deviceUpdateStarted NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress,
- imageVersion
- }
- STATUS current
- DESCRIPTION
- "The device update has started"
- ::= { remoteKVMDeviceNotifications 20 }
- deviceUpdateCompleted NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress,
- imageVersion,
- status
- }
- STATUS current
- DESCRIPTION
- "The device update is complete"
- ::= { remoteKVMDeviceNotifications 21 }
- configBackup NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress,
- fileType,
- fileVersion,
- status
- }
- STATUS current
- DESCRIPTION
- "The device configuration has been backed up"
- ::= { remoteKVMDeviceNotifications 22 }
- configRestore NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress,
- fileType,
- fileVersion,
- status
- }
- STATUS current
- DESCRIPTION
- "The device configuration has been restored"
- ::= { remoteKVMDeviceNotifications 23 }
- userPasswordChanged NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- targetUser,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "A user password was changed"
- ::= { remoteKVMDeviceNotifications 24 }
- powerNotification NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- outletName,
- status
- }
- STATUS current
- DESCRIPTION
- "The power outlet status (1-Active or 0-Inactive) notification "
- ::= { remoteKVMDeviceNotifications 25 }
- networkFailure NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- ethernetInterface
- }
- STATUS current
- DESCRIPTION
- "A network failure was detected on an ethernet port"
- ::= { remoteKVMDeviceNotifications 26 }
- -- Start new events defined exclusively for KX2
- networkParameterChanged NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- remoteIpAddress,
- oldIpAddress,
- newIpAddress,
- oldNetmask,
- newNetmask,
- newGateway,
- oldGateway
- }
- STATUS current
- DESCRIPTION
- "A network parameter change was detected"
- ::= { remoteKVMDeviceNotifications 27 }
- vmImageConnected NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "A Virtual Media Connected"
- ::= { remoteKVMDeviceNotifications 28 }
- vmImageDisconnected NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "A Virtual Media disconnected"
- ::= { remoteKVMDeviceNotifications 29 }
- cimUpdateStarted NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance
- }
- STATUS current
- DESCRIPTION
- "CIM update started"
- ::= { remoteKVMDeviceNotifications 30 }
- cimUpdateCompleted NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance
- }
- STATUS current
- DESCRIPTION
- "CIM update completed"
- ::= { remoteKVMDeviceNotifications 31 }
- cimConnected NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- cimName,
- serialNumber,
- portNumber
- }
- STATUS current
- DESCRIPTION
- "CIM Connected"
- ::= { remoteKVMDeviceNotifications 32 }
- cimDisconnected NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- cimName,
- serialNumber,
- portNumber
- }
- STATUS current
- DESCRIPTION
- "CIM Disconnected"
- ::= { remoteKVMDeviceNotifications 33 }
- powerOutletNotification NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- outletName,
- status
- }
- STATUS current
- DESCRIPTION
- "Powerstip-device outlet status Notification"
- ::= { remoteKVMDeviceNotifications 34 }
- -- Start new event to support RP products
- portConnectionDenied NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- portName
- }
- STATUS current
- DESCRIPTION
- "A connection to the target port is denied"
- ::= { remoteKVMDeviceNotifications 35 }
- -- Firmware file discarded
- firmwareFileDiscarded NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName
- }
- STATUS current
- DESCRIPTION
- "A firmaware file discarded "
- ::= { remoteKVMDeviceNotifications 36 }
- firmwareUpdateFailed NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName
- }
- STATUS current
- DESCRIPTION
- "A firmware update failed "
- ::= { remoteKVMDeviceNotifications 37 }
- firmwareValidationFailed NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName
- }
- STATUS current
- DESCRIPTION
- "A firmware validation failed "
- ::= { remoteKVMDeviceNotifications 38 }
- securityViolation NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "Security violation."
- ::= { remoteKVMDeviceNotifications 39 }
- deviceUpdateFailed NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName
- }
- STATUS current
- DESCRIPTION
- "Device update has failed."
- ::= { remoteKVMDeviceNotifications 40 }
- passwordSettingsChanged NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- status
- }
- STATUS current
- DESCRIPTION
- " Strong password settings changed "
- ::= { remoteKVMDeviceNotifications 41 }
- -- Network Failover Trap
- ethernetFailover NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- restoredLanPort
- }
- STATUS current
- DESCRIPTION
- "A ethernet failover was detected and restored on new ethernet interface"
- ::= { remoteKVMDeviceNotifications 42 }
- -- New traps for KX 1.4.5 Sujata Osowski 01/15/2007
- ipConflictDetected NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- rcpIPAddress,
- count
- }
- STATUS current
- DESCRIPTION
- "IP address conflict is detected."
- ::= { remoteKVMDeviceNotifications 43 }
- ipConflictResolved NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "IP address conflict is resolved."
- ::= { remoteKVMDeviceNotifications 44 }
- sxPortAlert NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- portNumber,
- sxAlertString
- }
- STATUS current
- DESCRIPTION
- "Port keyword detected."
- ::= { remoteKVMDeviceNotifications 45 }
- pduConnected NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- portNumber,
- pduName
- }
- STATUS current
- DESCRIPTION
- " A PDU is connected to the device directly through power port"
- ::= { remoteKVMDeviceNotifications 46 }
- pduDisconnected NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- portNumber,
- pduName
- }
- STATUS current
- DESCRIPTION
- " A PDU is disconnected from a power port"
- ::= { remoteKVMDeviceNotifications 47 }
- networkParameterChangedv2 NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- remoteIpAddress,
- changeEventText
- }
- STATUS current
- DESCRIPTION "A network parameter change was detected"
- ::= { remoteKVMDeviceNotifications 48 }
- portConnectv2 NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- portName,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "A user connected to a port"
- ::= { remoteKVMDeviceNotifications 49 }
- portDisconnectv2 NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- portName,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "A user disconnected from a port"
- ::= { remoteKVMDeviceNotifications 50 }
- userForcedLogout NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "A user was forcibly logged out by Admin"
- ::= { remoteKVMDeviceNotifications 51 }
- userUploadedCertificate NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress,
- certificateAuthorityName
- }
- STATUS current
- DESCRIPTION
- "A user uploaded a SSL Certificate."
- ::= { remoteKVMDeviceNotifications 52 }
- bladeChassisCommError NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- deviceName,
- portNumber,
- portName
- }
- STATUS current
- DESCRIPTION
- "A communications error with blade chassis device connected to this port was detected."
- ::= { remoteKVMDeviceNotifications 53 }
- setDateTime NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- deviceName,
- sysDateAndTime
- }
- STATUS current
- DESCRIPTION
- "The device time and date have been set."
- ::= { remoteKVMDeviceNotifications 54 }
- setFIPSMode NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- deviceName,
- fipsModeStatus
- }
- STATUS current
- DESCRIPTION
- "FIPS Mode status has been changed on the device."
- ::= { remoteKVMDeviceNotifications 55 }
- securityBannerChanged NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress,
- bannerChanges
- }
- STATUS current
- DESCRIPTION
- "Security Banner has changed "
- ::= { remoteKVMDeviceNotifications 56 }
- securityBannerAction NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- rcpIPAddress,
- bannerAction
- }
- STATUS current
- DESCRIPTION
- "User Acceptance/Rejection of Security Banner "
- ::= { remoteKVMDeviceNotifications 57 }
- scanStarted NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- portList,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "A user started a port scan"
- ::= { remoteKVMDeviceNotifications 58 }
- scanStopped NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- portList,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "A user stopped a port scan"
- ::= { remoteKVMDeviceNotifications 59 }
- userDisconnectedFromPort NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- targetUser,
- portName,
- userName,
- rcpIPAddress
- }
- STATUS current
- DESCRIPTION
- "A user was forcibly disconnected from a port by Admin"
- ::= { remoteKVMDeviceNotifications 60 }
- automaticScriptConfiguration NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- rcpIPAddress,
- fileName,
- status
- }
- STATUS current
- DESCRIPTION
- "The system attempted to run a script downloaded via TFTP"
- ::= { remoteKVMDeviceNotifications 61 }
- dsamUpdateStarted NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance
- }
- STATUS current
- DESCRIPTION
- "DSAM update started"
- ::= { remoteKVMDeviceNotifications 62 }
- dsamUpdateCompleted NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance
- }
- STATUS current
- DESCRIPTION
- "DSAM update completed"
- ::= { remoteKVMDeviceNotifications 63 }
- dsamConnected NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- serialNumber
- }
- STATUS current
- DESCRIPTION
- "DSAM Connected"
- ::= { remoteKVMDeviceNotifications 64 }
- dsamDisconnected NOTIFICATION-TYPE
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- serialNumber
- }
- STATUS current
- DESCRIPTION
- "DSAM Disconnected"
- ::= { remoteKVMDeviceNotifications 65 }
- -- *
- -- * SNMPv2 Conformance Information *******************************************
- -- *
- raritanMibConformance OBJECT IDENTIFIER ::= { raritan 9 }
- raritanMibCompliances OBJECT IDENTIFIER ::= { raritanMibConformance 1 }
- raritanMibGroups OBJECT IDENTIFIER ::= { raritanMibConformance 2 }
- raritanMibCompliance MODULE-COMPLIANCE
- STATUS current
- DESCRIPTION "Compliance statement for the private Raritan MIB."
- MODULE -- Module Raritan-MIB
- MANDATORY-GROUPS {
- raritanMibBasicGroup,
- raritanMibTrapGroup,
- raritanMibGetGroup
- }
- ::= { raritanMibCompliances 1 }
- raritanMibBasicGroup OBJECT-GROUP
- OBJECTS {
- rcpObjectName,
- rcpObjectInstance,
- userName,
- targetUser,
- groupName,
- rcpIPAddress,
- deviceName,
- portStatus,
- portName,
- clusterID,
- ipPort,
- resetType,
- interface,
- ethernetInterface,
- backupRestoreAction,
- imageType,
- imageVersion,
- status,
- fileVersion,
- fileType,
- outletName,
- portNumber,
- serialNumber,
- cimName,
- count,
- restoredLanPort,
- remoteIpAddress,
- oldIpAddress,
- newIpAddress,
- newNetmask,
- oldNetmask,
- oldGateway,
- newGateway,
- sxAlertString,
- pduName,
- changeEventText,
- certificateAuthorityName,
- sysDateAndTime,
- fipsModeStatus,
- bannerChanges,
- bannerAction,
- portList,
- fileName
- }
- STATUS current
- DESCRIPTION "Objects used in the traps."
- ::= { raritanMibGroups 1 }
- raritanMibTrapGroup NOTIFICATION-GROUP
- NOTIFICATIONS {
- rebootStarted,
- rebootCompleted,
- userLogin,
- userLogout,
- userAuthenticationFailure,
- portConnect,
- portDisconnect,
- userSessionTimeout,
- userConnectionLost,
- portStatusChange,
- userAdded,
- userModified,
- userDeleted,
- groupAdded,
- groupModified,
- groupDeleted,
- startCCManagement,
- stopCCManagement,
- factoryReset,
- deviceUpdateStarted,
- deviceUpdateCompleted,
- configBackup,
- configRestore,
- userPasswordChanged,
- powerNotification,
- networkFailure,
- networkParameterChanged,
- vmImageConnected,
- vmImageDisconnected,
- cimUpdateStarted,
- cimUpdateCompleted,
- cimConnected,
- cimDisconnected,
- powerOutletNotification,
- portConnectionDenied,
- firmwareFileDiscarded,
- firmwareUpdateFailed,
- firmwareValidationFailed,
- securityViolation,
- deviceUpdateFailed,
- passwordSettingsChanged,
- ethernetFailover,
- ipConflictDetected,
- ipConflictResolved,
- sxPortAlert,
- pduConnected,
- pduDisconnected,
- networkParameterChangedv2,
- portConnectv2,
- portDisconnectv2,
- userForcedLogout,
- userUploadedCertificate,
- bladeChassisCommError,
- setDateTime,
- setFIPSMode,
- securityBannerChanged,
- securityBannerAction,
- scanStarted,
- scanStopped,
- userDisconnectedFromPort,
- automaticScriptConfiguration,
- dsamUpdateStarted,
- dsamUpdateCompleted,
- dsamConnected,
- dsamDisconnected
- }
- STATUS current
- DESCRIPTION "Raritan traps."
- ::= { raritanMibGroups 2 }
- raritanMibGetGroup OBJECT-GROUP
- OBJECTS {
- systemUsageMemory,
- systemUsageCPU,
- systemPowerSupplyPowerOn,
- portDataNumber,
- portDataName,
- portDataType,
- portDataStatus
- }
- STATUS current
- DESCRIPTION "Raritan retrievable objects"
- ::= { raritanMibGroups 3 }
- END