-- *****************************************************************************
-- 
--  Copyright (c) 2005-2011, Doremi Labs, Inc.
--    All rights reserved.
-- 
--  Redistribution in source or binary forms, with or without
--  modification, are NOT permitted.
-- 
--    Doremi Labs, Inc.
--    306 East Alameda Avenue
--    Burbank, CA 91502
--    Tel : (818) 562 1101
--    Fax : (818) 562 1109
-- 
--  $Id: DOREMI-DC-DCPLAYER-MIB.MIB,v 1.13.2.4 2013-06-24 09:23:45 bvincent Exp $
--  
-- *****************************************************************************

DOREMI-DC-DCPLAYER-MIB DEFINITIONS ::= BEGIN

IMPORTS
 NOTIFICATION-TYPE, OBJECT-TYPE, OBJECT-IDENTITY, MODULE-IDENTITY, Counter32, Integer32
  FROM SNMPv2-SMI
 NOTIFICATION-GROUP, OBJECT-GROUP
  FROM SNMPv2-CONF
 TEXTUAL-CONVENTION, RowPointer, TruthValue, 
 DisplayString
  FROM SNMPv2-TC
 drmdcDCPlayerMib, DrmEventDescription, DrmEventSeverity, 
 DrmTemperature, DrmPowerLowVoltage, DrmFanSpeed, DrmResourceName, DrmWorkingState, DrmGenericTableIndex
  FROM DOREMI-HQ-REG-MIB;

drmDCPlayerModule MODULE-IDENTITY
 LAST-UPDATED "201104190000Z"
 ORGANIZATION 
  "DoremiLabs, Inc. - Digital Cinema Department."
 CONTACT-INFO 
  "1020 Chestnut St.
  Burbank, CA 91506
  U.S.A.
  Tel.: +1 (818) 562-1101
  mailto://sales@doremilabs.com
  http://www.doremilabs.com
  
  Maintainer: hmorillon@doremilabs.com"
 DESCRIPTION 
  "This MIB defines Nodes and Data Objects to support products from the
  Digital cinema player product family: it includes the dcp2000, showvault or DC-Post
  
  Copyright 2008-2011 DoremiLabs. Inc."

 REVISION "201103070000Z"
 DESCRIPTION 
  "First public version for DCPLAYER MIB.
  v 1.1, hmorillon@doremilabs.com"

 REVISION "201103300000Z"
 DESCRIPTION 
  "v 1.2, hmorillon@doremilabs.com"

 REVISION "201104190000Z"
 DESCRIPTION 
  "Projector Alarm table added
  v1.3, hmorillon@doremilabs.com"
::= { drmdcDCPlayerMib 1 }


DcpSealStatus ::= TEXTUAL-CONVENTION
 STATUS     current
 DESCRIPTION 
  ""
 SYNTAX  INTEGER {
  stateUnknown (1),
  stateNotApplicable (2),
  stateEngaged (3),
  stateBroken (4)
 }


DcpServiceStatus ::= TEXTUAL-CONVENTION
 STATUS     current
 DESCRIPTION 
  ""
 SYNTAX  INTEGER {
  svUnknown (1),
  svNotApplicable (2),
  svActive (3),
  svNotActive (4)
 }


DcpTamperStatus ::= TEXTUAL-CONVENTION
 STATUS     current
 DESCRIPTION 
  ""
 SYNTAX  INTEGER {
  stateUnknown (1),
  stateNotApplicable (2),
  stateClose (3),
  stateOpen (4)
 }


DcpWorkingState ::= TEXTUAL-CONVENTION
 STATUS     current
 DESCRIPTION 
  ""
 SYNTAX  INTEGER {
  stateUndefined (1),
  stateNotApplicable (2),
  stateNormal (3),
  stateWarning (4),
  stateError (5)
 }


dcpIdentity  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  "All properties related to the unit's identity and quick identification
  properties 
  are organized under this node."
 ::= { drmdcDCPlayerMib 2 }

dcpModulesRoot  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  "All read-only modules are organized under this root node."
 ::= { drmdcDCPlayerMib 3 }

dcpInventory  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  "This node is used to store inventory tables. "
 ::= { dcpModulesRoot 1 }

dcpStorage  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpModulesRoot 2 }

dcpStorageDevices  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorage 1 }

dcpStorageModules  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorage 2 }

dcpSensors  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpModulesRoot 3 }

dcpSENprobes  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSensors 1 }

dcpSENdetectors  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSensors 2 }

dcpSENStatus  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSensors 3 }

dcpSystem  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpModulesRoot 4 }

dcpSYSDate  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSystem 1 }

dcpSYSTimezone  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSYSDate 2 }

dcpSYSntp  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSYSDate 3 }

dcpChannels  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpModulesRoot 5 }

dcpChannelsOutbound  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpChannels 1 }

dcpOutChannelsData  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  "Specific channel data are organized under this node "
 ::= { dcpChannelsOutbound 2 }

dcpDevices  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpModulesRoot 6 }

dcpMediaDecoders  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpDevices 1 }

dcpMDData  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpMediaDecoders 2 }

dcpProjectors  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpDevices 2 }

dcpProjData  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectors 2 }

dcpSecurityManagers  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpDevices 3 }

dcpSMData  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSecurityManagers 2 }

dcpAssets  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpModulesRoot 7 }

dcpDiagnostics  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpModulesRoot 8 }

dcpEvents  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  "DC Player product Data and Trap definitions are organized under this node"
 ::= { drmdcDCPlayerMib 4 }

dcpEventList  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  "Notification objects are organized under this node."
 ::= { dcpEvents 0 }

dcpEventControl  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  "Node for data affecting Agent Trap Management semantics."
 ::= { dcpEvents 1 }

dcpEventDescriptors  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  "Event descriptors node."
 ::= { dcpEvents 2 }

dcpEventGlobalDescriptors  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpEventDescriptors 1 }

dcpEventNameDescriptors  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpEventDescriptors 2 }

dcpEventTableDescriptors  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpEventDescriptors 3 }

dcpConformance  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  "Organizational node for compliance objects."
 ::= { drmdcDCPlayerMib 5 }

dcpConformanceGroups  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  "Organization node for Conformance groups."
 ::= { dcpConformance 1 }

dcpConformanceTraps  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpConformance 2 }

dcpConformanceAll  OBJECT-IDENTITY
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpConformance 3 }

dcpIDProductName  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "product name as displayed in about window. This MIB can server different 
  but related product name.
  Exemple: dcp2000, DCPost, Showvault...
  "
 ::= { dcpIdentity 1 }

dcpIDSerialNumber  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Serial number used to uniquely reference the product. The serial number is 
  usually a seuqence of six digits, eventually followed by a revision number on two
  digits separated by a dash.
  Exemple: 201042-03, 205689
  The serial number is attached to the media decoder. It is important for servers
  where the media decoder is physically separated. (case for Showvault/IMB).
  In this case, connecting the server to a new IMB will change the serial number.
  It is sometimes referenced as Electronic serial number."
 ::= { dcpIdentity 2 }

dcpIDSoftwareVersion  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Server is operated by different software components. This value relates
  to the most significant software part. It is in format major.minor.revision-build.
  Exemple: 2.0.10-0."
 ::= { dcpIdentity 3 }

dcpIDFirmwareVersion  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This contains the primary media decoder firmware version. 
  
  If not applicable the returned version string is empty.
  If the Media decoder is not plugged in, a cached value will
  be returned."
 ::= { dcpIdentity 4 }

dcpIDDecoderVersion  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This contains the primary media decoder software version. 
  
  If not applicable the returned version string is empty.
  If the Media decoder is not plugged in, a cached value will
  be returned."
 ::= { dcpIdentity 5 }

dcpIDProductNumber  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "When applicable, servers are assigned a distinct serial number attached to 
  the chassis. It is usually indicated on a sticker on back of the chassis.
  
  It is also referenced as Chassis serial number in documentation.
  If not available, the Number is empty."
 ::= { dcpIdentity 6 }

dcpINVSoftwareTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpINVSoftwareEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  "This table contains a list of all significant software components in the system.
  Every entry in the table is assigned a fixed index value so that same property
  is listed using the same index independantly of the server it is running on.
  For instance index #3 is assigned to Video watermarking module. If this 
  component is not applicable for a particular setup, the entry 3 will not be listed.
  The possible entries are:
    #1 Main software suite
    #2 Host operating system
    #3 Video watermarking
    #4 Audio watermarking
    #5 MD firmware
    #6 MD software
    #7 BIOS
    #8 SNMP Agent
    #9 Auro
    #10 Kernel rescue
  "
 ::= { dcpInventory 1 }

dcpINVSoftwareEntry  OBJECT-TYPE
 SYNTAX  DcpINVSoftwareEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpSWIndex }
 ::= { dcpINVSoftwareTable 1 }

DcpINVSoftwareEntry ::= SEQUENCE {
 dcpSWIndex
  DrmGenericTableIndex,
 dcpSWTitle
  DisplayString,
 dcpSWType
  INTEGER,
 dcpSWVersion
  DisplayString
}

dcpSWIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the software inventory table."
 ::= { dcpINVSoftwareEntry 1 }

dcpSWTitle  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Title is a human friendly string to give indication about the referenced component.
  "
 ::= { dcpINVSoftwareEntry 2 }

dcpSWType  OBJECT-TYPE
 SYNTAX     INTEGER {
  swSoftware (1),
  swFirmware (2),
  swOperatingSystem (3),
  swLibrary (4),
  swPackage (5),
  swKernel (6)
 }
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This enumeration value is used to give indication about what type the software
  compoonent is. Possible values are:
   o regular software program suite
   o firmware used to operate hardware
   o operating system
   o library
   o optional package installed on the system
   o kernel"
 ::= { dcpINVSoftwareEntry 3 }

dcpSWVersion  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Version string attached to the software component. If not applicable or unknown
  an empty string is returned."
 ::= { dcpINVSoftwareEntry 4 }

dcpINVHardwareTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpINVHardwareEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  "This table contains a list of all significant hardware components in the system.
  Every entry in the table is assigned a fixed index value so that same property
  is listed using the same index independantly of the server it is running on.
  For instance index #3 is assigned to MD board component. If this 
  component is not applicable for a particular setup, the entry 3 will not be listed.
  The possible entries are:
   #1 Host motherboard
   #2 Host memory
   #3 MD board
   #4 Booting device
   #5 CPU
   #10 - #18 Data discs
   "
 ::= { dcpInventory 2 }

dcpINVHardwareEntry  OBJECT-TYPE
 SYNTAX  DcpINVHardwareEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpHWIndex }
 ::= { dcpINVHardwareTable 1 }

DcpINVHardwareEntry ::= SEQUENCE {
 dcpHWIndex
  DrmGenericTableIndex,
 dcpHWTitle
  DisplayString,
 dcpHWType
  INTEGER,
 dcpHWModel
  DisplayString,
 dcpHWVersion
  DisplayString,
 dcpHWSerial
  DisplayString,
 dcpHWWorkingState
  DrmWorkingState
}

dcpHWIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the hardware inventory table."
 ::= { dcpINVHardwareEntry 1 }

dcpHWTitle  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Title is a human friendly string to give indication about the referenced component."
 ::= { dcpINVHardwareEntry 2 }

dcpHWType  OBJECT-TYPE
 SYNTAX     INTEGER {
  hwMotherboard (1),
  hwHDD (2),
  hwChassis (3),
  hwCPU (4),
  hwMemory (5),
  hwAddonBoard (6),
  hwUSBGeneric (7)
 }
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This enumeration value is used to give indication about what type the hardware
  compoonent is. Possible values are:
  o motherboard
  o Hard disk (Storage)
  o chassis
  o CPU
  o Memory
  o AddOn board
  o misc USB device
  "
 ::= { dcpINVHardwareEntry 3 }

dcpHWModel  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Gives indication about hardware component model and origin. Thsi entry 
  usually includes the vendor string and model reference.
  If not applicable or unknown an empty string is returned."
 ::= { dcpINVHardwareEntry 4 }

dcpHWVersion  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Version string attached to the hardware component. If not applicable or unknown
  an empty string is returned."
 ::= { dcpINVHardwareEntry 5 }

dcpHWSerial  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "If the component is assigned an uniq serial number, it is indicated here. 
  If not applicable or unknown an empty string is returned."
 ::= { dcpINVHardwareEntry 6 }

dcpHWWorkingState  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This property gives an overview of the current working status for the referenced
  component. 
  Possible values are:
  o undefined: the state is not known. It is not an error; it indicates the system can't
  report accurate status for the component. It can't be precluded that component is
  failing or not.
  o not applicable: the referenced component doesn't have a working state for good,
  expected reason. It may be used for instance for an optional  component that is 
  missing.
  o normal: the referenced component is running normally
  o warning: the referenced resource is operational but is report some anomalies.
  System is still operational; but the case shall be investigated, and eventually the 
  resource replaced or fixed.
  o error: the component doesn't work reliably. The system may still be operational or
  not but it is expected that some features are no longer working.
      "
 ::= { dcpINVHardwareEntry 7 }

-- 
-- 

dcpINVFeatureTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpINVFeatureEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  "This table lists the significant features or capacity for the system. Features
  are often related to optional  software module, optional hardware module,
  or optional features activated by a license.
  Every entry in the table is assigned a fixed index value so that same property
  is listed using the same index independantly of the server it is running on.
  
  The possible entries are:
   #1 Partial blackout
   #2 Dolby 3D
   #3 Reald 3D
   #4 Support 4K
   #5 Auro
   #6 Dolby 3D side-by-side
   #7 Reald 3D side-by-side
   #8 Sensio 3D
   #9 Dual IMB"
 ::= { dcpInventory 3 }

dcpINVFeatureEntry  OBJECT-TYPE
 SYNTAX  DcpINVFeatureEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpFEATIndex }
 ::= { dcpINVFeatureTable 1 }

DcpINVFeatureEntry ::= SEQUENCE {
 dcpFEATIndex
  DrmGenericTableIndex,
 dcpFEATTitle
  DisplayString,
 dcpFEATStatus
  DcpServiceStatus
}

dcpFEATIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the feature table."
 ::= { dcpINVFeatureEntry 1 }

dcpFEATTitle  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpINVFeatureEntry 2 }

dcpFEATStatus  OBJECT-TYPE
 SYNTAX     DcpServiceStatus
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpINVFeatureEntry 3 }

-- #1 Host primary boot device
-- #10 first data drive (sda)
-- #11 second data drive (sdb)
-- #12 third data drive (sdc)
-- #13 fourth data drive (sdd)
-- #14 fifth data drive (sde)
-- #15 sixth data drive (sdf)
-- #16 seventh data drive
-- #17 heighth data drive
-- 

dcpStorageDeviceTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpStorageDeviceEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageDevices 1 }

dcpStorageDeviceEntry  OBJECT-TYPE
 SYNTAX  DcpStorageDeviceEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpStorageDeviceIndex }
 ::= { dcpStorageDeviceTable 1 }

DcpStorageDeviceEntry ::= SEQUENCE {
 dcpStorageDeviceIndex
  DrmGenericTableIndex,
 dcpStorageDeviceTitle
  DisplayString,
 dcpStorageDeviceBus
  INTEGER,
 dcpStorageDeviceCapacity
  Integer32,
 dcpStorageDeviceType
  INTEGER,
 dcpStorageDeviceModel
  DisplayString,
 dcpStorageDeviceWorkingState
  DrmWorkingState
}

dcpStorageDeviceIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the device table."
 ::= { dcpStorageDeviceEntry 1 }

dcpStorageDeviceTitle  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageDeviceEntry 2 }

dcpStorageDeviceBus  OBJECT-TYPE
 SYNTAX     INTEGER {
  busUnknown (1),
  busIDE (2),
  busUSB (3),
  busSATA (4),
  busSAS (5),
  busFirewire (6)
 }
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageDeviceEntry 3 }

dcpStorageDeviceCapacity  OBJECT-TYPE
 SYNTAX     Integer32
 UNITS  "Megabyte"
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageDeviceEntry 4 }

dcpStorageDeviceType  OBJECT-TYPE
 SYNTAX     INTEGER {
  devUnknown (1),
  devCF (2),
  devSSD (3),
  devHDD (4)
 }
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageDeviceEntry 5 }

dcpStorageDeviceModel  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageDeviceEntry 6 }

dcpStorageDeviceWorkingState  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This property gives an overview of the current working status for the referenced
  component. 
  Possible values are:
  o undefined: the state is not known. It is not an error; it indicates the system can't
  report accurate status for the component. It can't be precluded that component is
  failing or not.
  o not applicable: the referenced component doesn't have a working state for good,
  expected reason. It may be used for instance for an optional  component that is 
  missing.
  o normal: the referenced component is running normally
  o warning: the referenced resource is operational but is report some anomalies.
  System is still operational; but the case shall be investigated, and eventually the 
  resource replaced or fixed.
  o error: the component doesn't work reliably. The system may still be operational or
  not but it is expected that some features are no longer working."
 ::= { dcpStorageDeviceEntry 7 }

-- #1 Host primary boot device
-- #10 first data drive (sda)
-- #11 second data drive (sdb)
-- #12 third data drive (sdc)
-- #13 fourth data drive (sdd)
-- #14 fifth data drive (sde)
-- #15 sixth data drive (sdf)
-- #16 seventh data drive
-- #17 heighth data drive

dcpStorageSMARTTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpStorageSMARTEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageDevices 2 }

dcpStorageSMARTEntry  OBJECT-TYPE
 SYNTAX  DcpStorageSMARTEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpStorageDeviceIndex }
 ::= { dcpStorageSMARTTable 1 }

DcpStorageSMARTEntry ::= SEQUENCE {
 dcpStorageSMARTIndex
  DrmGenericTableIndex,
 dcpStorageSMARTSupport
  TruthValue,
 dcpStorageSMARTRawReadError
  Integer32,
 dcpStorageSMARTReallocatedSectorCount
  Integer32,
 dcpStorageSMARTReallocatedEvent
  Integer32,
 dcpStorageSMARTSeekErrorRate
  Integer32,
 dcpStorageSMARTUDMAError
  Integer32
}

dcpStorageSMARTIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the SMART device table. 
  This OID is not accessible since the table uses index from device table."
 ::= { dcpStorageSMARTEntry 1 }

dcpStorageSMARTSupport  OBJECT-TYPE
 SYNTAX     TruthValue
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageSMARTEntry 2 }

dcpStorageSMARTRawReadError  OBJECT-TYPE
 SYNTAX     Integer32
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageSMARTEntry 3 }

dcpStorageSMARTReallocatedSectorCount  OBJECT-TYPE
 SYNTAX     Integer32
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageSMARTEntry 4 }

dcpStorageSMARTReallocatedEvent  OBJECT-TYPE
 SYNTAX     Integer32
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageSMARTEntry 5 }

dcpStorageSMARTSeekErrorRate  OBJECT-TYPE
 SYNTAX     Integer32
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageSMARTEntry 6 }

dcpStorageSMARTUDMAError  OBJECT-TYPE
 SYNTAX     Integer32
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageSMARTEntry 7 }

-- #1 /
-- #2 /doremi
-- #3 /var
-- #4 /data
-- #5 /opt
-- 

dcpStorageModulesTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpStorageModulesEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageModules 1 }

dcpStorageModulesEntry  OBJECT-TYPE
 SYNTAX  DcpStorageModulesEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpStorageModuleIndex }
 ::= { dcpStorageModulesTable 1 }

DcpStorageModulesEntry ::= SEQUENCE {
 dcpStorageModuleIndex
  DrmGenericTableIndex,
 dcpStorageModuleTitle
  DisplayString,
 dcpStorageModuleType
  INTEGER,
 dcpStorageModuleCapacity
  Integer32,
 dcpStorageModuleUsage
  Integer32,
 dcpStorageModuleWorkingState
  DrmWorkingState
}

dcpStorageModuleIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the module table."
 ::= { dcpStorageModulesEntry 1 }

dcpStorageModuleTitle  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageModulesEntry 2 }

dcpStorageModuleType  OBJECT-TYPE
 SYNTAX     INTEGER {
  stSystem (1),
  stData (2),
  stExternal (3)
 }
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageModulesEntry 3 }

dcpStorageModuleCapacity  OBJECT-TYPE
 SYNTAX     Integer32
 UNITS  "Megabyte"
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageModulesEntry 4 }

dcpStorageModuleUsage  OBJECT-TYPE
 SYNTAX     Integer32
 UNITS  "percent"
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageModulesEntry 5 }

dcpStorageModuleWorkingState  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This property gives an overview of the current working status for the referenced
  component. 
  Possible values are:
  o undefined: the state is not known. It is not an error; it indicates the system can't
  report accurate status for the component. It can't be precluded that component is
  failing or not.
  o not applicable: the referenced component doesn't have a working state for good,
  expected reason. It may be used for instance for an optional  component that is 
  missing.
  o normal: the referenced component is running normally
  o warning: the referenced resource is operational but is report some anomalies.
  System is still operational; but the case shall be investigated, and eventually the 
  resource replaced or fixed.
  o error: the component doesn't work reliably. The system may still be operational or
  not but it is expected that some features are no longer working."
 ::= { dcpStorageModulesEntry 6 }

-- #1 /
-- #2 /doremi
-- #3 /var
-- #4 /data
-- #5 /opt

dcpStorageRAIDTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpStorageRAIDEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageModules 2 }

dcpStorageRAIDEntry  OBJECT-TYPE
 SYNTAX  DcpStorageRAIDEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpStorageModuleIndex }
 ::= { dcpStorageRAIDTable 1 }

DcpStorageRAIDEntry ::= SEQUENCE {
 dcpStorageRAIDIndex
  DrmGenericTableIndex,
 dcpStorageRAIDModuleTitle
  DisplayString,
 dcpStorageRAIDType
  INTEGER,
 dcpStorageRAIDRecovery
  Integer32,
 dcpStorageRAIDWorkingState
  DrmWorkingState,
 dcpStorageRAIDSize
  Integer32,
 dcpStorageRAIDState
  INTEGER,
 dcpStorageRAIDuuid
  DisplayString
}

dcpStorageRAIDIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the RAID module table. 
  This OID is not accessible since the table uses index from module table."
 ::= { dcpStorageRAIDEntry 1 }

dcpStorageRAIDModuleTitle  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageRAIDEntry 2 }

dcpStorageRAIDType  OBJECT-TYPE
 SYNTAX     INTEGER {
  raidUnknown (1),
  raidNone (2),
  raidStripping (3),
  raidMirror (4),
  raid5 (5),
  raidLinear (6)
 }
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageRAIDEntry 3 }

dcpStorageRAIDRecovery  OBJECT-TYPE
 SYNTAX     Integer32
 UNITS  "Percent"
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpStorageRAIDEntry 4 }

dcpStorageRAIDWorkingState  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This property gives an overview of the current working status for the referenced
  component. 
  Possible values are:
  o undefined: the state is not known. It is not an error; it indicates the system can't
  report accurate status for the component. It can't be precluded that component is
  failing or not.
  o not applicable: the referenced component doesn't have a working state for good,
  expected reason. It may be used for instance for an optional  component that is 
  missing.
  o normal: the referenced component is running normally
  o warning: the referenced resource is operational but is report some anomalies.
  System is still operational; but the case shall be investigated, and eventually the 
  resource replaced or fixed.
  o error: the component doesn't work reliably. The system may still be operational or
  not but it is expected that some features are no longer working."
 ::= { dcpStorageRAIDEntry 5 }

dcpStorageRAIDSize  OBJECT-TYPE
 SYNTAX     Integer32
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Number of devices in this RAID"
 ::= { dcpStorageRAIDEntry 6 }

dcpStorageRAIDState  OBJECT-TYPE
 SYNTAX     INTEGER {
  raidStateUnknown (1),
  raidStateOffline (2),
  raidStateFailOnline (3),
  raidStateDegraded (4),
  raidStateRecovery (5),
  raidStateWorkingOnline (6)
 }
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "States description:
  - raidStateOffline: module is not started, hence not operational
  - raidStateFailOnline: module is started but NOT operational
  - raidStateDegraded: module is started and operational; but one or more 
    devices are faulty and require to be fix. Performance may be degraded.
  - raidStateRecovery: module is started and operational; and one or more
    devices are being corrected/initialized.
  - raidStateWorkingOnline: module is started and fully operational
  
  Please note that a RAID module just initialized/created will be in stateRecovery
  state.
  "
 ::= { dcpStorageRAIDEntry 7 }

dcpStorageRAIDuuid  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Unique identifier assigned to the RAID module. Empty string if not available"
 ::= { dcpStorageRAIDEntry 8 }

-- #1 Host motherboard fan
-- #2 Host CPU fan
-- #3 Host Chipset fan
-- #4 Host fan 4
-- #5 Host fan 5
-- #6 Host fan 6
-- 

dcpSENfansTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpSENfansEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  "Collection of sensors monitoring the fan speed"
 ::= { dcpSENprobes 1 }

dcpSENfansEntry  OBJECT-TYPE
 SYNTAX  DcpSENfansEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpFANIndex }
 ::= { dcpSENfansTable 1 }

DcpSENfansEntry ::= SEQUENCE {
 dcpFANIndex
  DrmGenericTableIndex,
 dcpFANTitle
  DrmResourceName,
 dcpFANWorkingState
  DrmWorkingState,
 dcpFANValue
  DrmFanSpeed,
 dcpFANLowThreshold
  DrmFanSpeed,
 dcpFANHighThreshold
  DrmFanSpeed
}

dcpFANIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the fan table."
 ::= { dcpSENfansEntry 1 }

dcpFANTitle  OBJECT-TYPE
 SYNTAX     DrmResourceName
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Fan identifier string"
 ::= { dcpSENfansEntry 2 }

dcpFANWorkingState  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This property gives an overview of the current working status for the referenced
  component. 
  Possible values are:
  o undefined: the state is not known. It is not an error; it indicates the system can't
  report accurate status for the component. It can't be precluded that component is
  failing or not.
  o not applicable: the referenced component doesn't have a working state for good,
  expected reason. It may be used for instance for an optional  component that is 
  missing.
  o normal: the referenced component is running normally
  o warning: the referenced resource is operational but is report some anomalies.
  System is still operational; but the case shall be investigated, and eventually the 
  resource replaced or fixed.
  o error: the component doesn't work reliably. The system may still be operational or
  not but it is expected that some features are no longer working."
 ::= { dcpSENfansEntry 3 }

dcpFANValue  OBJECT-TYPE
 SYNTAX     DrmFanSpeed
 UNITS  "rpm"
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Current fan speed unit in Round Per Minute"
 ::= { dcpSENfansEntry 4 }

dcpFANLowThreshold  OBJECT-TYPE
 SYNTAX     DrmFanSpeed
 UNITS  "rpm"
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Indicate the value under which the fan component is outside the
  specification. This value is used by the associated trap entry.
  Speed unit is Round Per Minute
  Null value indicates no threshold "
 ::= { dcpSENfansEntry 5 }

dcpFANHighThreshold  OBJECT-TYPE
 SYNTAX     DrmFanSpeed
 UNITS  "rpm"
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Indicate the value above which the fan component is outside the
  specification. This value is used by the associated trap entry.
  Speed unit is Round Per Minute
  Null value indicates no threshold "
 ::= { dcpSENfansEntry 6 }

-- #1 Host voltage 1
-- #2 Host voltage 2
-- #3 Host voltage 3
-- #4 Host voltage 4
-- #5 Host voltage 5
-- #6 Host voltage 6
-- #7 Host voltage 7
-- #8 MD RTC battery
-- 
-- 

dcpSENPowerTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpSENPowerEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSENprobes 2 }

dcpSENPowerEntry  OBJECT-TYPE
 SYNTAX  DcpSENPowerEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpPOWIndex }
 ::= { dcpSENPowerTable 1 }

DcpSENPowerEntry ::= SEQUENCE {
 dcpPOWIndex
  DrmGenericTableIndex,
 dcpPOWTitle
  DrmResourceName,
 dcpPOWWorkingState
  DrmWorkingState,
 dcpPOWValue
  DrmPowerLowVoltage,
 dcpPOWLowThreshold
  DrmPowerLowVoltage,
 dcpPOWHighThreshold
  DrmPowerLowVoltage
}

dcpPOWIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the power table."
 ::= { dcpSENPowerEntry 1 }

dcpPOWTitle  OBJECT-TYPE
 SYNTAX     DrmResourceName
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Power supply identifier string"
 ::= { dcpSENPowerEntry 2 }

dcpPOWWorkingState  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This property gives an overview of the current working status for the referenced
  component. 
  Possible values are:
  o undefined: the state is not known. It is not an error; it indicates the system can't
  report accurate status for the component. It can't be precluded that component is
  failing or not.
  o not applicable: the referenced component doesn't have a working state for good,
  expected reason. It may be used for instance for an optional  component that is 
  missing.
  o normal: the referenced component is running normally
  o warning: the referenced resource is operational but is report some anomalies.
  System is still operational; but the case shall be investigated, and eventually the 
  resource replaced or fixed.
  o error: the component doesn't work reliably. The system may still be operational or
  not but it is expected that some features are no longer working."
 ::= { dcpSENPowerEntry 3 }

dcpPOWValue  OBJECT-TYPE
 SYNTAX     DrmPowerLowVoltage
 UNITS  "millivolts"
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSENPowerEntry 4 }

dcpPOWLowThreshold  OBJECT-TYPE
 SYNTAX     DrmPowerLowVoltage
 UNITS  "millivolts"
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Null value indicates no threshold "
 ::= { dcpSENPowerEntry 5 }

dcpPOWHighThreshold  OBJECT-TYPE
 SYNTAX     DrmPowerLowVoltage
 UNITS  "millivolts"
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Null value indicates no threshold "
 ::= { dcpSENPowerEntry 6 }

-- #1 Host motherboard
-- #2 Host CPU
-- #3 Host chipset
-- #4 MD FPGA #1
-- #5 MD FPGA #2
-- #6 MD RTC
-- #10 First data drive
-- #11 second data drive
-- #12 third data drive
-- #13 4th data drive
-- #14 5th data drive
-- #15 6th data drive
-- #16 7th data drive
-- #17 8th data drive
-- #18 9th data drive
-- 

dcpSENHeatTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpSENHeatEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSENprobes 3 }

dcpSENHeatEntry  OBJECT-TYPE
 SYNTAX  DcpSENHeatEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpHEATIndex }
 ::= { dcpSENHeatTable 1 }

DcpSENHeatEntry ::= SEQUENCE {
 dcpHEATIndex
  DrmGenericTableIndex,
 dcpHEATTitle
  DisplayString,
 dcpHEATWorkingState
  DrmWorkingState,
 dcpHEATValue
  DrmTemperature,
 dcpHEATLowThreshold
  DrmTemperature,
 dcpHEATHighThreshold
  DrmTemperature
}

dcpHEATIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the heat table."
 ::= { dcpSENHeatEntry 1 }

dcpHEATTitle  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSENHeatEntry 2 }

dcpHEATWorkingState  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This property gives an overview of the current working status for the referenced
  component. 
  Possible values are:
  o undefined: the state is not known. It is not an error; it indicates the system can't
  report accurate status for the component. It can't be precluded that component is
  failing or not.
  o not applicable: the referenced component doesn't have a working state for good,
  expected reason. It may be used for instance for an optional  component that is 
  missing.
  o normal: the referenced component is running normally
  o warning: the referenced resource is operational but is report some anomalies.
  System is still operational; but the case shall be investigated, and eventually the 
  resource replaced or fixed.
  o error: the component doesn't work reliably. The system may still be operational or
  not but it is expected that some features are no longer working."
 ::= { dcpSENHeatEntry 3 }

dcpHEATValue  OBJECT-TYPE
 SYNTAX     DrmTemperature
 UNITS  "Celcius degree"
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSENHeatEntry 4 }

dcpHEATLowThreshold  OBJECT-TYPE
 SYNTAX     DrmTemperature
 UNITS  "Celcius degree"
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Null value indicates no threshold "
 ::= { dcpSENHeatEntry 5 }

dcpHEATHighThreshold  OBJECT-TYPE
 SYNTAX     DrmTemperature
 UNITS  "Celcius degree"
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Null value indicates no threshold "
 ::= { dcpSENHeatEntry 6 }

-- #1 Service door

dcpSENTampersTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpSENTampersEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSENdetectors 1 }

dcpSENTampersEntry  OBJECT-TYPE
 SYNTAX  DcpSENTampersEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpTAMPIndex }
 ::= { dcpSENTampersTable 1 }

DcpSENTampersEntry ::= SEQUENCE {
 dcpTAMPIndex
  DrmGenericTableIndex,
 dcpTAMPTitle
  DisplayString,
 dcpTAMPStatus
  DcpTamperStatus
}

dcpTAMPIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the tampers table."
 ::= { dcpSENTampersEntry 1 }

dcpTAMPTitle  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSENTampersEntry 2 }

dcpTAMPStatus  OBJECT-TYPE
 SYNTAX     DcpTamperStatus
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSENTampersEntry 3 }

-- #1 Software integrity
-- #2 Physical marriage
-- #3 Logical marriage
-- #4 Service door
-- 

dcpSENSealsTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpSENSealsEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSENdetectors 2 }

dcpSENSealsEntry  OBJECT-TYPE
 SYNTAX  DcpSENSealsEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpSEALIndex }
 ::= { dcpSENSealsTable 1 }

DcpSENSealsEntry ::= SEQUENCE {
 dcpSEALIndex
  DrmGenericTableIndex,
 dcpSEALTitle
  DisplayString,
 dcpSEALStatus
  DcpSealStatus
}

dcpSEALIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the seals table."
 ::= { dcpSENSealsEntry 1 }

dcpSEALTitle  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSENSealsEntry 2 }

dcpSEALStatus  OBJECT-TYPE
 SYNTAX     DcpSealStatus
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSENSealsEntry 3 }

dcpSENServiceTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpSENServiceEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSENStatus 1 }

dcpSENServiceEntry  OBJECT-TYPE
 SYNTAX  DcpSENServiceEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpSERVIndex }
 ::= { dcpSENServiceTable 1 }

DcpSENServiceEntry ::= SEQUENCE {
 dcpSERVIndex
  DrmGenericTableIndex,
 dcpSERVTitle
  DisplayString,
 dcpSERVStatus
  DcpServiceStatus
}

dcpSERVIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the service table."
 ::= { dcpSENServiceEntry 1 }

dcpSERVTitle  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSENServiceEntry 2 }

dcpSERVStatus  OBJECT-TYPE
 SYNTAX     DcpServiceStatus
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSENServiceEntry 3 }

-- #1 Host Memory
-- 

dcpSENAlarmTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpSENAlarmEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSENStatus 2 }

dcpSENAlarmEntry  OBJECT-TYPE
 SYNTAX  DcpSENAlarmEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpAlarmTableIndex }
 ::= { dcpSENAlarmTable 1 }

DcpSENAlarmEntry ::= SEQUENCE {
 dcpAlarmTableIndex
  DrmGenericTableIndex,
 dcpAlarmTableTitle
  DisplayString,
 dcpAlarmTableWorkingState
  DrmWorkingState
}

dcpAlarmTableIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the alarm table."
 ::= { dcpSENAlarmEntry 1 }

dcpAlarmTableTitle  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSENAlarmEntry 2 }

dcpAlarmTableWorkingState  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This property gives an overview of the current working status for the referenced
  component. 
  Possible values are:
  o undefined: the state is not known. It is not an error; it indicates the system can't
  report accurate status for the component. It can't be precluded that component is
  failing or not.
  o not applicable: the referenced component doesn't have a working state for good,
  expected reason. It may be used for instance for an optional  component that is 
  missing.
  o normal: the referenced component is running normally
  o warning: the referenced resource is operational but reports some abnomalies.
  System is still operational; but the case shall be investigated, and eventually the 
  resource replaced or fixed.
  o error: the component doesn't work reliably. The system may still be operational or
  not but it is expected that some features are no longer working."
 ::= { dcpSENAlarmEntry 3 }

dcpSYSCurrentDate  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Current date in format as described in RFC 3339"
 ::= { dcpSYSDate 1 }

dcpTZString  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSYSTimezone 1 }

dcpTZGMTOffset  OBJECT-TYPE
 SYNTAX     Integer32
 UNITS  "minute"
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Current offset in minutes west from Greenwich"
 ::= { dcpSYSTimezone 2 }

dcpTZNextDSTDate  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Date and tIme when the next scheduled Daylight saving time will occur"
 ::= { dcpSYSTimezone 3 }

dcpNTPLastSyncServer  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSYSntp 1 }

dcpNTPLastSyncDate  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSYSntp 2 }

dcpNTPLastSyncOffset  OBJECT-TYPE
 SYNTAX     Integer32
 UNITS  "seconds"
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Time adjustment performed by the last NTP synchonrisatino operation.
  The information is in seconds.
  If not applicable (the NTP was never run on the unit, the value is 0. Hence
  This value shall be confirmed by a not-empty value for last server or last
  synchronization date."
 ::= { dcpSYSntp 3 }

-- #1 Host master clock
-- #2 MD security clock
-- 

dcpSYSClockTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpSYSClockEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSYSDate 4 }

dcpSYSClockEntry  OBJECT-TYPE
 SYNTAX  DcpSYSClockEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpCLKIndex }
 ::= { dcpSYSClockTable 1 }

DcpSYSClockEntry ::= SEQUENCE {
 dcpCLKIndex
  DrmGenericTableIndex,
 dcpCLKTitle
  DisplayString,
 dcpCLKType
  INTEGER,
 dcpCLKDrift
  Integer32,
 dcpCLKWorkingState
  DrmWorkingState,
 dcpCLKConsumed
  Integer32,
 dcpCLKAuthorized
  Integer32
}

dcpCLKIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the clock table."
 ::= { dcpSYSClockEntry 1 }

dcpCLKTitle  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSYSClockEntry 2 }

dcpCLKType  OBJECT-TYPE
 SYNTAX     INTEGER {
  typeVirtual (1),
  typePermanent (2),
  typeSecured (3)
 }
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSYSClockEntry 3 }

dcpCLKDrift  OBJECT-TYPE
 SYNTAX     Integer32
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Number of seconds drift compared to the master clock"
 ::= { dcpSYSClockEntry 4 }

dcpCLKWorkingState  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This property gives an overview of the current working status for the referenced
  component. 
  Possible values are:
  o undefined: the state is not known. It is not an error; it indicates the system can't
  report accurate status for the component. It can't be precluded that component is
  failing or not.
  o not applicable: the referenced component doesn't have a working state for good,
  expected reason. It may be used for instance for an optional  component that is 
  missing.
  o normal: the referenced component is running normally
  o warning: the referenced resource is operational but is report some anomalies.
  System is still operational; but the case shall be investigated, and eventually the 
  resource replaced or fixed.
  o error: the component doesn't work reliably. The system may still be operational or
  not but it is expected that some features are no longer working."
 ::= { dcpSYSClockEntry 5 }

dcpCLKConsumed  OBJECT-TYPE
 SYNTAX     Integer32
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Number of seconds the clock has been adjusted"
 ::= { dcpSYSClockEntry 6 }

dcpCLKAuthorized  OBJECT-TYPE
 SYNTAX     Integer32
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Maximum number of seconds that device can be adjusted. 0 means that there is no limit.
  The number of seconds that the device can be adjusted is then
  dcpCLKAuthorized - dcpCLKConsumed
  "
 ::= { dcpSYSClockEntry 7 }

dcpOutChannelsCount  OBJECT-TYPE
 SYNTAX     Counter32
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpChannelsOutbound 1 }

dcpOutChannelsListTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpOutChannelsListEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpChannelsOutbound 3 }

dcpOutChannelsListEntry  OBJECT-TYPE
 SYNTAX  DcpOutChannelsListEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpOutChannelsListIndex }
 ::= { dcpOutChannelsListTable 1 }

DcpOutChannelsListEntry ::= SEQUENCE {
 dcpOutChannelsListIndex
  DrmGenericTableIndex,
 dcpOutChannelsListTitle
  DisplayString,
 dcpOutChannelsListType
  INTEGER,
 dcpOutChannelsListWorkingState
  DrmWorkingState
}

dcpOutChannelsListIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the channel list table."
 ::= { dcpOutChannelsListEntry 1 }

dcpOutChannelsListTitle  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpOutChannelsListEntry 2 }

dcpOutChannelsListType  OBJECT-TYPE
 SYNTAX     INTEGER {
  chPlayOnly (1)
 }
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpOutChannelsListEntry 3 }

dcpOutChannelsListWorkingState  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This property gives an overview of the current working status for the referenced
  component. 
  Possible values are:
  o undefined: the state is not known. It is not an error; it indicates the system can't
  report accurate status for the component. It can't be precluded that component is
  failing or not.
  o not applicable: the referenced component doesn't have a working state for good,
  expected reason. It may be used for instance for an optional  component that is 
  missing.
  o normal: the referenced component is running normally
  o warning: the referenced resource is operational but is report some anomalies.
  System is still operational; but the case shall be investigated, and eventually the 
  resource replaced or fixed.
  o error: the component doesn't work reliably. The system may still be operational or
  not but it is expected that some features are no longer working."
 ::= { dcpOutChannelsListEntry 4 }

dcpOutChannelStatusTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpOutChannelStatusEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpChannelsOutbound 4 }

dcpOutChannelStatusEntry  OBJECT-TYPE
 SYNTAX  DcpOutChannelStatusEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpOutChannelsListIndex }
 ::= { dcpOutChannelStatusTable 1 }

DcpOutChannelStatusEntry ::= SEQUENCE {
 dcpOutChannelStatusIndex
  DrmGenericTableIndex,
 dcpOutChannelStatusOperation
  INTEGER,
 dcpOutChannelPlayUnderflowsCounter
  Counter32,
 dcpOutChannelPlayCrashCounter
  Counter32
}

dcpOutChannelStatusIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the channel status table. 
  This OID is not accessible since the table uses index from channel list table."
 ::= { dcpOutChannelStatusEntry 1 }

dcpOutChannelStatusOperation  OBJECT-TYPE
 SYNTAX     INTEGER {
  stUnknown (1),
  stIdle (2),
  stPaused (3),
  stPlaying (4)
 }
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpOutChannelStatusEntry 2 }

dcpOutChannelPlayUnderflowsCounter  OBJECT-TYPE
 SYNTAX     Counter32
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpOutChannelStatusEntry 3 }

dcpOutChannelPlayCrashCounter  OBJECT-TYPE
 SYNTAX     Counter32
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpOutChannelStatusEntry 4 }

dcpOutChannelSecurityTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpOutChannelSecurityEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpChannelsOutbound 5 }

dcpOutChannelSecurityEntry  OBJECT-TYPE
 SYNTAX  DcpOutChannelSecurityEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpOutChannelsListIndex }
 ::= { dcpOutChannelSecurityTable 1 }

DcpOutChannelSecurityEntry ::= SEQUENCE {
 dcpOutChannelSecurityIndex
  DrmGenericTableIndex,
 dcpOutChannelSecurityMarriage
  DrmWorkingState,
 dcpOutChannelSecurityServiceDoor
  DrmWorkingState,
 dcpOutChannelSecurityClearance
  DrmWorkingState
}

dcpOutChannelSecurityIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the channel security table. 
  This OID is not accessible since the table uses index from channel list table."
 ::= { dcpOutChannelSecurityEntry 1 }

dcpOutChannelSecurityMarriage  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This setting indicates if the marriage state will break playback.
  Possible values are:
  o underfined: the state is not determined yet.
  o not applicable: the referenced component does not apply to this system
  o normal: marriage is working fine
  o warning: marriage is not working fine but it won't prevent playback
  o error: marriage is broken and will prevent playback"
 ::= { dcpOutChannelSecurityEntry 2 }

dcpOutChannelSecurityServiceDoor  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This setting indicates if the service door state will break playback.
  Possible values are:
  o underfined: the state is not determined yet.
  o not applicable: the referenced component does not apply to this system
  o normal: service door is armed
  o warning: service door is not working fine but it won't prevent playback
  o error: service door is broken and will prevent playback"
 ::= { dcpOutChannelSecurityEntry 3 }

dcpOutChannelSecurityClearance  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This setting indicates if the system is operational security wise.
  Possible values are:
  o underfined: the state is not determined yet.
  o not applicable: the referenced component does not apply to this system
  o normal: there are no security related issues detected
  o warning: security related issues have been detected that will not prevent playback
  o error: security related issues have been detected that will prevent playback"
 ::= { dcpOutChannelSecurityEntry 4 }

dcpMDCount  OBJECT-TYPE
 SYNTAX     Counter32
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpMediaDecoders 1 }

dcpProjectorsCount  OBJECT-TYPE
 SYNTAX     Counter32
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectors 1 }

dcpProjectorListTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpProjectorListEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectors 3 }

dcpProjectorListEntry  OBJECT-TYPE
 SYNTAX  DcpProjectorListEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpProjectorListIndex }
 ::= { dcpProjectorListTable 1 }

DcpProjectorListEntry ::= SEQUENCE {
 dcpProjectorListIndex
  DrmGenericTableIndex,
 dcpProjectorTitle
  DisplayString,
 dcpProjectorModel
  DisplayString,
 dcpProjectorConnected
  TruthValue,
 dcpProjectorAddress
  DisplayString,
 dcpProjectorCertificateThumbprint
  DisplayString,
 dcpProjectorPrimary
  TruthValue
}

dcpProjectorListIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the projector table."
 ::= { dcpProjectorListEntry 1 }

dcpProjectorTitle  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectorListEntry 2 }

dcpProjectorModel  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectorListEntry 3 }

dcpProjectorConnected  OBJECT-TYPE
 SYNTAX     TruthValue
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Gives indication if the projector is connected or not."
 ::= { dcpProjectorListEntry 4 }

dcpProjectorAddress  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectorListEntry 5 }

dcpProjectorCertificateThumbprint  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectorListEntry 6 }

dcpProjectorPrimary  OBJECT-TYPE
 SYNTAX     TruthValue
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Gives indication if the projector is primary or not."
 ::= { dcpProjectorListEntry 7 }

dcpProjectorsStatusTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpProjectorsStatusEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectors 4 }

dcpProjectorsStatusEntry  OBJECT-TYPE
 SYNTAX  DcpProjectorsStatusEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpProjectorListIndex }
 ::= { dcpProjectorsStatusTable 1 }

DcpProjectorsStatusEntry ::= SEQUENCE {
 dcpProjectorsStatusIndex
  DrmGenericTableIndex,
 dcpProjectorsStatusLamp
  INTEGER,
 dcpProjectorsStatusDowser
  INTEGER
}

dcpProjectorsStatusIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the projector status table. 
  This OID is not accessible since the table uses index from projector list table."
 ::= { dcpProjectorsStatusEntry 1 }

dcpProjectorsStatusLamp  OBJECT-TYPE
 SYNTAX     INTEGER {
  pjLampUnknown (1),
  pjLampOn (2),
  pjLampOff (3)
 }
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectorsStatusEntry 2 }

dcpProjectorsStatusDowser  OBJECT-TYPE
 SYNTAX     INTEGER {
  dowserUnknown (1),
  dowserOpen (2),
  dowserClosed (3)
 }
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectorsStatusEntry 3 }

dcpProjectorsAlarmTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpProjectorsAlarmEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  "This table collects alarm reported by  connected projectors. Some alarm sensors
  may not be available or applicable depending on the underlying hardware.
  Every sensor is reported as a WorkingState status for the associated modules:
  - unknwon
  - not-applicable
  - ok (no_alarm)
  - warning (warning alarm)
  - error (alert)
  "
 ::= { dcpProjectors 5 }

dcpProjectorsAlarmEntry  OBJECT-TYPE
 SYNTAX  DcpProjectorsAlarmEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpProjectorListIndex }
 ::= { dcpProjectorsAlarmTable 1 }

DcpProjectorsAlarmEntry ::= SEQUENCE {
 dcpProjectorsAlarmIndex
  DrmGenericTableIndex,
 dcpProjectorsAlarmLampTimer
  DrmWorkingState,
 dcpProjectorsAlarmFilterTimer
  DrmWorkingState,
 dcpProjectorsAlarmFan
  DrmWorkingState,
 dcpProjectorsAlarmTemperature
  DrmWorkingState,
 dcpProjectorsAlarmBattery
  DrmWorkingState,
 dcpProjectorsAlarmSecurity
  DrmWorkingState,
 dcpProjectorsAlarmSecurityLog
  DrmWorkingState
}

dcpProjectorsAlarmIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectorsAlarmEntry 1 }

dcpProjectorsAlarmLampTimer  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectorsAlarmEntry 2 }

dcpProjectorsAlarmFilterTimer  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectorsAlarmEntry 3 }

dcpProjectorsAlarmFan  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectorsAlarmEntry 4 }

dcpProjectorsAlarmTemperature  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectorsAlarmEntry 5 }

dcpProjectorsAlarmBattery  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectorsAlarmEntry 6 }

dcpProjectorsAlarmSecurity  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectorsAlarmEntry 7 }

dcpProjectorsAlarmSecurityLog  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpProjectorsAlarmEntry 8 }

dcpSecurityManagersCount  OBJECT-TYPE
 SYNTAX     Counter32
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpSecurityManagers 1 }

-- #1 NTP sync.
-- 

dcpCheckListTable  OBJECT-TYPE
 SYNTAX SEQUENCE OF DcpCheckListEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpDiagnostics 1 }

dcpCheckListEntry  OBJECT-TYPE
 SYNTAX  DcpCheckListEntry
 MAX-ACCESS not-accessible
 STATUS     current
 DESCRIPTION 
  ""
 INDEX { dcpCheckListIndex }
 ::= { dcpCheckListTable 1 }

DcpCheckListEntry ::= SEQUENCE {
 dcpCheckListIndex
  DrmGenericTableIndex,
 dcpCheckListTitle
  DisplayString,
 dcpCheckListWorkingState
  DrmWorkingState,
 dcpCheckListDescription
  DisplayString
}

dcpCheckListIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "Main index used to reference entries in the check list table."
 ::= { dcpCheckListEntry 1 }

dcpCheckListTitle  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpCheckListEntry 2 }

dcpCheckListWorkingState  OBJECT-TYPE
 SYNTAX     DrmWorkingState
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  "This property gives an overview of the current working status for the referenced
  component. 
  Possible values are:
  o undefined: the state is not known. It is not an error; it indicates the system can't
  report accurate status for the component. It can't be precluded that component is
  failing or not.
  o not applicable: the referenced component doesn't have a working state for good,
  expected reason. It may be used for instance for an optional  component that is 
  missing.
  o normal: the referenced component is running normally
  o warning: the referenced resource is operational but is report some anomalies.
  System is still operational; but the case shall be investigated, and eventually the 
  resource replaced or fixed.
  o error: the component doesn't work reliably. The system may still be operational or
  not but it is expected that some features are no longer working."
 ::= { dcpCheckListEntry 3 }

dcpCheckListDescription  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS read-only
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpCheckListEntry 4 }

dcpEvtDiskStatus  NOTIFICATION-TYPE
 OBJECTS { dcpEvSeverity, 
  dcpEvType, 
  dcpEvDiskName, 
  dcpEvDescription }
 STATUS     current
 DESCRIPTION 
  "Trap sent for events related to disk devices."
 ::= { dcpEventList 1 }

dcpEvtStorageStatus  NOTIFICATION-TYPE
 OBJECTS { dcpEvSeverity, 
  dcpEvType, 
  dcpEvStorageName, 
  dcpEvDescription }
 STATUS     current
 DESCRIPTION 
  "Trap sent for events related to storage modules."
 ::= { dcpEventList 2 }

dcpEvtFanStatus  NOTIFICATION-TYPE
 OBJECTS { dcpEvSeverity, 
  dcpEvType, 
  dcpEvResourceName, 
  dcpEvResourceIndex, 
  dcpEvDescription }
 STATUS     current
 DESCRIPTION 
  "This event references an item from the dcpSENfansTable."
 ::= { dcpEventList 3 }

dcpEvtPowerStatus  NOTIFICATION-TYPE
 OBJECTS { dcpEvSeverity, 
  dcpEvType, 
  dcpEvResourceName, 
  dcpEvResourceIndex, 
  dcpEvDescription }
 STATUS     current
 DESCRIPTION 
  "This event references an item from the dcpSENPowerTable."
 ::= { dcpEventList 4 }

dcpEvtHeatStatus  NOTIFICATION-TYPE
 OBJECTS { dcpEvSeverity, 
  dcpEvType, 
  dcpEvResourceName, 
  dcpEvResourceIndex, 
  dcpEvDescription }
 STATUS     current
 DESCRIPTION 
  "This event references an item from the dcpSENHeatTable."
 ::= { dcpEventList 5 }

dcpEvtTamperStatus  NOTIFICATION-TYPE
 OBJECTS { dcpEvSeverity, 
  dcpEvType, 
  dcpEvResourceName, 
  dcpEvResourceIndex, 
  dcpEvDescription }
 STATUS     current
 DESCRIPTION 
  "This event references an item from the dcpSENTampersTable."
 ::= { dcpEventList 6 }

dcpEvtSealStatus  NOTIFICATION-TYPE
 OBJECTS { dcpEvSeverity, 
  dcpEvType, 
  dcpEvResourceName, 
  dcpEvResourceIndex, 
  dcpEvDescription }
 STATUS     current
 DESCRIPTION 
  "This event references an item from the dcpSENSealsTable."
 ::= { dcpEventList 7 }

dcpEvtAlarmStatus  NOTIFICATION-TYPE
 OBJECTS { dcpEvSeverity, 
  dcpEvType, 
  dcpEvResourceName, 
  dcpEvResourceIndex, 
  dcpEvDescription }
 STATUS     current
 DESCRIPTION 
  "This event references an item from the dcpSENAlarmTable."
 ::= { dcpEventList 8 }

dcpEvtChecklistStatus  NOTIFICATION-TYPE
 OBJECTS { dcpEvSeverity, 
  dcpEvType, 
  dcpEvResourceName, 
  dcpEvResourceIndex, 
  dcpEvDescription }
 STATUS     current
 DESCRIPTION 
  "This event references a checklist item from the dcpCheckListTable."
 ::= { dcpEventList 9 }

dcpEvtProjectorAlarmStatus  NOTIFICATION-TYPE
 OBJECTS { dcpEvSeverity, 
  dcpEvType, 
  dcpEvResourceName, 
  dcpEvDescription }
 STATUS     current
 DESCRIPTION 
  "This event references an item from the dcpProjectorsAlarmTable."
 ::= { dcpEventList 10 }

dcpEvtRTCStatus  NOTIFICATION-TYPE
  OBJECTS { dcpEvSeverity,
    dcpEvType,
    dcpEvResourceName,
    dcpEvDescription }
  STATUS     current
  DESCRIPTION
    "This event references an item from the dcpSYSClockTable."
  ::= { dcpEventList 11 }

dcpEvSeverity  OBJECT-TYPE
 SYNTAX     DrmEventSeverity
 MAX-ACCESS accessible-for-notify
 STATUS     current
 DESCRIPTION 
  "Severity level assigned to an event:
    normalinformational message without any alarm condition.
    warning:potential problem but is not conclusive to trigger a failure shortly.
    minor:identified problem without any degradation of function.
    major:identified problem with possible degradation of function.
    critical:serious failure that leads to broken functions.
   "
 ::= { dcpEventGlobalDescriptors 1 }

dcpEvDescription  OBJECT-TYPE
 SYNTAX     DrmEventDescription
 MAX-ACCESS accessible-for-notify
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpEventGlobalDescriptors 2 }

dcpEvType  OBJECT-TYPE
 SYNTAX     INTEGER {
  healthCondition (1),
  statusChange (2),
  lowThreshold (3),
  highThreshold (4),
  propertyChange (5)
 }
 MAX-ACCESS accessible-for-notify
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpEventGlobalDescriptors 3 }

dcpEvResourceName  OBJECT-TYPE
 SYNTAX     DrmResourceName
 MAX-ACCESS accessible-for-notify
 STATUS     current
 DESCRIPTION 
  "This property is used to name resource. It is used when there is no possible 
  mistake about the referenced resource."
 ::= { dcpEventGlobalDescriptors 4 }

dcpEvTitle  OBJECT-TYPE
 SYNTAX     DisplayString
 MAX-ACCESS accessible-for-notify
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpEventGlobalDescriptors 5 }

dcpEvResourceIndex  OBJECT-TYPE
 SYNTAX     DrmGenericTableIndex
 MAX-ACCESS accessible-for-notify
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpEventGlobalDescriptors 6 }

dcpEvDiskName  OBJECT-TYPE
 SYNTAX     DrmResourceName
 MAX-ACCESS accessible-for-notify
 STATUS     current
 DESCRIPTION 
  "Human friendly identifier for hard disk resource."
 ::= { dcpEventNameDescriptors 1 }

dcpEvStorageName  OBJECT-TYPE
 SYNTAX     DrmResourceName
 MAX-ACCESS accessible-for-notify
 STATUS     current
 DESCRIPTION 
  "Human friendly identifier for a storage resource."
 ::= { dcpEventNameDescriptors 2 }

dcpEvChannelName  OBJECT-TYPE
 SYNTAX     DrmResourceName
 MAX-ACCESS accessible-for-notify
 STATUS     current
 DESCRIPTION 
  "Human friendly identifier for the channel for wich the event is being generated."
 ::= { dcpEventNameDescriptors 3 }

dcpEvRawPointer  OBJECT-TYPE
 SYNTAX     RowPointer
 MAX-ACCESS accessible-for-notify
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpEventTableDescriptors 1 }

dcpDataGroupAll  OBJECT-GROUP
 OBJECTS { dcpCheckListDescription, 
  dcpCheckListIndex, 
  dcpCheckListTitle, 
  dcpCheckListWorkingState, 
  dcpCLKAuthorized, 
  dcpCLKConsumed, 
  dcpCLKDrift, 
  dcpCLKIndex, 
  dcpCLKTitle, 
  dcpCLKType, 
  dcpCLKWorkingState, 
  dcpFANHighThreshold, 
  dcpFANIndex, 
  dcpFANLowThreshold, 
  dcpFANTitle, 
  dcpFANValue, 
  dcpFANWorkingState, 
  dcpFEATIndex, 
  dcpFEATStatus, 
  dcpFEATTitle, 
  dcpAlarmTableIndex, 
  dcpAlarmTableTitle, 
  dcpAlarmTableWorkingState, 
  dcpHEATHighThreshold, 
  dcpHEATIndex, 
  dcpHEATLowThreshold, 
  dcpHEATTitle, 
  dcpHEATValue, 
  dcpHEATWorkingState, 
  dcpHWIndex, 
  dcpHWModel, 
  dcpHWSerial, 
  dcpHWTitle, 
  dcpHWType, 
  dcpHWVersion, 
  dcpHWWorkingState, 
  dcpIDDecoderVersion, 
  dcpIDFirmwareVersion, 
  dcpIDProductName, 
  dcpIDSerialNumber, 
  dcpIDSoftwareVersion, 
  dcpMDCount, 
  dcpNTPLastSyncDate, 
  dcpNTPLastSyncOffset, 
  dcpNTPLastSyncServer, 
  dcpOutChannelPlayCrashCounter, 
  dcpOutChannelPlayUnderflowsCounter, 
  dcpOutChannelsCount, 
  dcpOutChannelSecurityClearance, 
  dcpOutChannelSecurityMarriage, 
  dcpOutChannelSecurityServiceDoor, 
  dcpOutChannelsListIndex, 
  dcpOutChannelsListTitle, 
  dcpOutChannelsListType, 
  dcpOutChannelsListWorkingState, 
  dcpOutChannelStatusOperation, 
  dcpPOWHighThreshold, 
  dcpPOWIndex, 
  dcpPOWLowThreshold, 
  dcpPOWTitle, 
  dcpPOWValue, 
  dcpPOWWorkingState, 
  dcpProjectorAddress, 
  dcpProjectorCertificateThumbprint, 
  dcpProjectorPrimary,
  dcpProjectorModel, 
  dcpProjectorsCount, 
  dcpProjectorsStatusDowser, 
  dcpProjectorsStatusLamp, 
  dcpProjectorTitle, 
  dcpProjectorConnected, 
  dcpSEALIndex, 
  dcpSEALStatus, 
  dcpSEALTitle, 
  dcpSecurityManagersCount, 
  dcpSERVIndex, 
  dcpSERVStatus, 
  dcpSERVTitle, 
  dcpStorageDeviceBus, 
  dcpStorageDeviceCapacity, 
  dcpStorageDeviceIndex, 
  dcpStorageDeviceModel, 
  dcpStorageDeviceTitle, 
  dcpStorageDeviceType, 
  dcpStorageDeviceWorkingState, 
  dcpStorageModuleCapacity, 
  dcpStorageModuleIndex, 
  dcpStorageModuleTitle, 
  dcpStorageModuleType, 
  dcpStorageModuleUsage, 
  dcpStorageModuleWorkingState, 
  dcpStorageRAIDIndex, 
  dcpStorageRAIDModuleTitle, 
  dcpStorageRAIDRecovery, 
  dcpStorageRAIDSize, 
  dcpStorageRAIDType, 
  dcpStorageRAIDWorkingState, 
  dcpStorageSMARTIndex, 
  dcpStorageSMARTRawReadError, 
  dcpStorageSMARTReallocatedEvent, 
  dcpStorageSMARTReallocatedSectorCount, 
  dcpStorageSMARTSeekErrorRate, 
  dcpStorageSMARTSupport, 
  dcpStorageSMARTUDMAError, 
  dcpSWIndex, 
  dcpSWTitle, 
  dcpSWType, 
  dcpSWVersion, 
  dcpSYSCurrentDate, 
  dcpTAMPIndex, 
  dcpTAMPStatus, 
  dcpTAMPTitle, 
  dcpTZGMTOffset, 
  dcpTZNextDSTDate, 
  dcpTZString }
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpConformanceGroups 1 }

dcpDataGroupNotifyOnly  OBJECT-GROUP
 OBJECTS { dcpEvChannelName, 
  dcpEvDescription, 
  dcpEvDiskName, 
  dcpEvRawPointer, 
  dcpEvResourceIndex, 
  dcpEvResourceName, 
  dcpEvSeverity, 
  dcpEvStorageName, 
  dcpEvTitle, 
  dcpEvType }
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpConformanceGroups 2 }

dcpTrapGroupAll  NOTIFICATION-GROUP
 NOTIFICATIONS { dcpEvtDiskStatus, 
  dcpEvtStorageStatus, 
  dcpEvtFanStatus, 
  dcpEvtPowerStatus, 
  dcpEvtHeatStatus }
 STATUS     current
 DESCRIPTION 
  ""
 ::= { dcpConformanceTraps 1 }
END


-- This MIB was created using NuDesign Team's Visual MIBuilder (Ver 4.6).