-- SmartOptics Enterprise Specific Port MIB. -- -- Copyright (c) 2014, SmartOptics -- All rights reserved -- MSERIES-PORT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF PortType, PortStatus, PortMode FROM MSERIES-TC mseries FROM MSERIES-MIB; smartPort MODULE-IDENTITY LAST-UPDATED "201402121344Z" ORGANIZATION "SmartOptics" CONTACT-INFO "http://www.smartoptics.com" DESCRIPTION "This is the enterprise specific Port MIB for SmartOptics M-Series." REVISION "201402121344Z" DESCRIPTION "The initial revision of the MSERIES Port MIB." ::= { mseries 3 } smartPortObjects OBJECT IDENTIFIER ::= { smartPort 1 } smartPortGeneral OBJECT IDENTIFIER ::= { smartPortObjects 1} smartPortList OBJECT IDENTIFIER ::= { smartPortObjects 2} smartPortMIBConformance OBJECT IDENTIFIER ::= { smartPort 2} smartPortGroups OBJECT IDENTIFIER ::= { smartPortMIBConformance 1} smartPortCompliances OBJECT IDENTIFIER ::= { smartPortMIBConformance 2} -- -- General -- -- -- The Port Table -- smartPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SmartPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A port table." ::= { smartPortList 1 } smartPortEntry OBJECT-TYPE SYNTAX SmartPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the port list." INDEX { smartPortIndex } ::= { smartPortTable 1 } SmartPortEntry ::= SEQUENCE { smartPortIndex Unsigned32, smartPortName DisplayString, smartPortAlias DisplayString, smartPortType PortType, smartPortPower Integer32, smartPortStatus PortStatus, smartPortMode PortMode, smartPortHighPowerAlarmThreshold Integer32, smartPortLowPowerAlarmThreshold Integer32 } smartPortIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique index for each port that corresponds to the index in the interface table" ::= { smartPortEntry 1 } smartPortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the port." ::= { smartPortEntry 2 } smartPortAlias OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User configurable Port Alias for the port. Not writeable in SmartOS v2.3" ::= { smartPortEntry 3 } smartPortType OBJECT-TYPE SYNTAX PortType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of port. rx(1) - Receiving port. tx(2) - Transmitting port. biDi(3) - Bidirectional port." ::= { smartPortEntry 4 } smartPortPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The power level in units of 0.1 dBm." ::= { smartPortEntry 5 } smartPortStatus OBJECT-TYPE SYNTAX PortStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state for a port. idle(1) - The port is not activated down(2) - The port traffic is lost. up(3) - There is traffic on the port. high(4) - The port got to high power. low(5) - The port got to low power. eyeSafety(6) - The Line Tx port is in Eye Safety Mode. This means that either the connector on the Line Tx port is not inserted or that you have too strong reflection from the line fiber. cd(7) - Channel detected. ncd(8) - No channel detected." ::= { smartPortEntry 6 } smartPortMode OBJECT-TYPE SYNTAX PortMode MAX-ACCESS read-write STATUS current DESCRIPTION "The Mode of the Port. normal (1) - The port is active. No alarms are beeing suppressed. service (2) . The port is in service mode and alarms are beeing suppressed. When service is ready smartPortMode should be set to 'normal' again. Not writeable in SmartOS v2.3" ::= { smartPortEntry 7 } smartPortHighPowerAlarmThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for the High Power alarm. Not writeable in SmartOS v2.3" ::= { smartPortEntry 8 } smartPortLowPowerAlarmThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for the Low Power alarm. Not writeable in SmartOS v2.3" ::= { smartPortEntry 9 } -- ---------------------------------------------------- -- Conformance -- ---------------------------------------------------- -- ---------------------------------------------------- -- Object and event groups -- ---------------------------------------------------- smartPortListGroupV1 OBJECT-GROUP OBJECTS { smartPortIndex, smartPortName, smartPortAlias, smartPortType, smartPortPower, smartPortStatus, smartPortMode, smartPortHighPowerAlarmThreshold, smartPortLowPowerAlarmThreshold } STATUS current DESCRIPTION "The Port List MIB objects v1." ::= { smartPortGroups 1 } -- ---------------------------------------------------- -- Compliance -- ---------------------------------------------------- smartPortBasicComplV1 MODULE-COMPLIANCE STATUS current DESCRIPTION "Basic implementation requirements for the port MIB V1." MODULE MANDATORY-GROUPS { smartPortListGroupV1 } ::= { smartPortCompliances 1 } END