ATEN-IPMI-MIB DEFINITIONS ::= BEGIN -- -- Top-level infrastructure of the ATEN CORP. enterprise MIB tree -- IMPORTS NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE, enterprises, Integer32, IpAddress FROM SNMPv2-SMI DateAndTime FROM SNMPv2-TC; aten MODULE-IDENTITY LAST-UPDATED "200903201150Z" ORGANIZATION "www.aten.com.tw" CONTACT-INFO "email:shuyufu@aten.com.tw" DESCRIPTION "Top-level infrastructure of the ATEN CORP. enterprise MIB tree" REVISION "200903201150Z" DESCRIPTION "First draft" ::= { enterprises 21317 } -- -- ATEN CORP. enterprise-specific management objects -- ipmi OBJECT IDENTIFIER ::= { aten 1 } boardinfo OBJECT IDENTIFIER ::= { ipmi 5 } hardwareinfo OBJECT IDENTIFIER ::= { ipmi 6 } storage OBJECT IDENTIFIER ::= { ipmi 7 } powerinfo OBJECT IDENTIFIER ::= { ipmi 14 } fruinfo OBJECT IDENTIFIER ::= { ipmi 16 } ntpinfo OBJECT IDENTIFIER ::= { ipmi 17 } nvme OBJECT IDENTIFIER ::= { ipmi 19 } network OBJECT IDENTIFIER ::= { ipmi 21 } smtp OBJECT IDENTIFIER ::= { ipmi 22 } -- -- MIB Module Object Types -- sel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of SELs" ::= { ipmi 2 } sensorTable OBJECT-TYPE SYNTAX SEQUENCE OF SensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of sensors. The number of entries is given by the value of ifNumber." ::= { ipmi 3 } sensorEntry OBJECT-TYPE SYNTAX SensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular sensor." INDEX { sensorNumber } ::= { sensorTable 1 } SensorEntry ::= SEQUENCE { sensorNumber Integer32, sensorReading OCTET STRING, sensorPositiveHysteresis Integer32, sensorNegativeHysteresis Integer32, lncThreshold OCTET STRING, lcThreshold OCTET STRING, lnrThreshold OCTET STRING, uncThreshold OCTET STRING, ucThreshold OCTET STRING, unrThreshold OCTET STRING, eventAssertionEnable Integer32, eventDeassertionEnable Integer32, sensorIDString OCTET STRING } sensorNumber OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization." ::= { sensorEntry 1 } sensorReading OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software." ::= { sensorEntry 2 } sensorPositiveHysteresis OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention." ::= { sensorEntry 3 } sensorNegativeHysteresis OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface." ::= { sensorEntry 4 } lncThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero." ::= { sensorEntry 5 } lcThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length." ::= { sensorEntry 6 } lnrThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with ifAdminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, ifAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state)." ::= { sensorEntry 7 } uncThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If ifAdminStatus is down(2) then ifOperStatus should be down(2). If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should change to dormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection); it should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state; it should remain in the notPresent(6) state if the interface has missing (typically, hardware) components." ::= { sensorEntry 8 } ucThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { sensorEntry 9 } unrThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { sensorEntry 10 } eventAssertionEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { sensorEntry 11 } eventDeassertionEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. This object is deprecated in favour of ifInMulticastPkts and ifInBroadcastPkts." ::= { sensorEntry 12 } sensorIDString OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "16-byte length field for displaying each available sensors' ID string." ::= { sensorEntry 13 } powerStatus OBJECT-TYPE SYNTAX INTEGER { poweroff(0), poweron(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get and set the power status of system. Set case: 0 : power off 1 : power on 2 : power reset" ::= { ipmi 4 } coldResetBMC OBJECT-TYPE SYNTAX Integer32 (1) MAX-ACCESS read-write STATUS current DESCRIPTION "Cold reset the BMC." ::= { ipmi 8 } bmcMajorVesion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "BMC Major Vesion" ::= { boardinfo 1 } bmcMinorVesion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "BMC Minor Vesion" ::= { boardinfo 2 } bmcBuildDate OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "BMC FW Build Date" ::= { boardinfo 3 } biosVesion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "BIOS Vesion" ::= { boardinfo 4 } biosBuildDate OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "BIOS Build Date" ::= { boardinfo 5 } hostName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(64)) MAX-ACCESS read-only STATUS current DESCRIPTION "BMC Host Name" ::= { boardinfo 6 } bmcBuildVesion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "BMC Build Vesion" ::= { boardinfo 7 } serialNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Motherboard Serial Number" ::= { hardwareinfo 1 } cpuTable OBJECT-TYPE SYNTAX SEQUENCE OF CpuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of CPUs. The number of entries is given by the number of CPUs." ::= { hardwareinfo 2 } cpuEntry OBJECT-TYPE SYNTAX CpuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular CPU." INDEX { cpuNumber } ::= { cpuTable 1 } CpuEntry ::= SEQUENCE { cpuNumber Integer32, processor OCTET STRING, speed Integer32, core Integer32, coreActive Integer32, manufacturer OCTET STRING } cpuNumber OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each CPU. It is recommended that values are assigned contiguously starting from 1." ::= { cpuEntry 1 } processor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Processor name." ::= { cpuEntry 2 } speed OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Processor speed (MHz)." ::= { cpuEntry 3 } core OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of processor cores." ::= { cpuEntry 4 } coreActive OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active processor cores." ::= { cpuEntry 5 } manufacturer OBJECT-TYPE SYNTAX OCTET STRING (SIZE(64)) MAX-ACCESS read-only STATUS current DESCRIPTION "CPU Manufacturer" ::= { cpuEntry 6 } dimmTable OBJECT-TYPE SYNTAX SEQUENCE OF DimmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of DIMMs. The number of entries is given by the number of DIMMs." ::= { hardwareinfo 3 } dimmEntry OBJECT-TYPE SYNTAX DimmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular DIMM." INDEX { dimmNumber } ::= { dimmTable 1 } DimmEntry ::= SEQUENCE { dimmNumber Integer32, dimmLocation OCTET STRING, dimmMaxCapSpeed Integer32, dimmOpSpeed Integer32, dimmSize Integer32, dimmSerialNo OCTET STRING, dimmPartNo OCTET STRING, dimmManufacturer OCTET STRING } dimmNumber OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each DIMM. It is recommended that values are assigned contiguously starting from 1." ::= { dimmEntry 1 } dimmLocation OBJECT-TYPE SYNTAX OCTET STRING (SIZE(64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The location of this DIMM." ::= { dimmEntry 2 } dimmMaxCapSpeed OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The max capable speed (MHz) of this DIMM." ::= { dimmEntry 3 } dimmOpSpeed OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The current operation speed (MHz) of this DIMM." ::= { dimmEntry 4 } dimmSize OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The size (MBytes) of this DIMM." ::= { dimmEntry 5 } dimmSerialNo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of this DIMM." ::= { dimmEntry 6 } dimmPartNo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of this DIMM." ::= { dimmEntry 7 } dimmManufacturer OBJECT-TYPE SYNTAX OCTET STRING (SIZE(64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The manufacturer of this DIMM." ::= { dimmEntry 8 } controllerTable OBJECT-TYPE SYNTAX SEQUENCE OF ControllerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of raid controllers. The number of entries is given by the number of controllers." ::= { storage 1 } controllerEntry OBJECT-TYPE SYNTAX ControllerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular controller." INDEX { controllerNumber } ::= { controllerTable 1 } ControllerEntry ::= SEQUENCE { controllerNumber Integer32, controllerProductName OCTET STRING, serial OCTET STRING, package OCTET STRING, fwVersion OCTET STRING, biosVersion OCTET STRING, bootBlockVersion OCTET STRING, batteryStatus Integer32, pcieLocation Integer32, pcieSlot Integer32 } controllerNumber OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each controller. It is recommended that values are assigned contiguously starting from 1." ::= { controllerEntry 1 } controllerProductName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(96)) MAX-ACCESS read-only STATUS current DESCRIPTION "Product name of the controller." ::= { controllerEntry 2 } serial OBJECT-TYPE SYNTAX OCTET STRING (SIZE(32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Serial number of the controller." ::= { controllerEntry 3 } package OBJECT-TYPE SYNTAX OCTET STRING (SIZE(96)) MAX-ACCESS read-only STATUS current DESCRIPTION "Package version of the controller." ::= { controllerEntry 4 } fwVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Firmware version of the controller." ::= { controllerEntry 5 } biosVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(32)) MAX-ACCESS read-only STATUS current DESCRIPTION "BIOS version of the controller." ::= { controllerEntry 6 } bootBlockVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Boot block version of the controller." ::= { controllerEntry 7 } batteryStatus OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Battery status of the controller. 0: Missing 1: Charging 2: Discharging 3: Optimal 4: Needs to be replaced" ::= { controllerEntry 8 } pcieLocation OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "PCIE location of the controller. 0: ONBOARD 1: RISER WIO Right 2: RISER WIO Left 3: RISER Ultra IO" ::= { controllerEntry 9 } pcieSlot OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "PCIE slot number of the controller." ::= { controllerEntry 10 } nicTable OBJECT-TYPE SYNTAX SEQUENCE OF NicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of NICs. The number of entries is given by the number of NICs." ::= { ipmi 20 } nicEntry OBJECT-TYPE SYNTAX NicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular NIC." INDEX { nicNumber } ::= { nicTable 1 } NicEntry ::= SEQUENCE { nicNumber Integer32, nicName OCTET STRING, nicMac OCTET STRING, nicIpv4Addr IpAddress, nicIpv6Addr OCTET STRING, nicGateway OCTET STRING, nicNetmask OCTET STRING, nicFqdn OCTET STRING, nicDns OCTET STRING, nicSpeed Integer32, nicDescript OCTET STRING, nicStatus OCTET STRING } nicNumber OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each NIC. It is recommended that values are assigned contiguously starting from 1." ::= { nicEntry 1 } nicName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the NIC." ::= { nicEntry 2 } nicMac OBJECT-TYPE SYNTAX OCTET STRING (SIZE(17)) MAX-ACCESS read-only STATUS current DESCRIPTION "MAC of the NIC." ::= { nicEntry 3 } nicIpv4Addr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 address of the NIC." ::= { nicEntry 4 } nicIpv6Addr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(45)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv6 address of the NIC." ::= { nicEntry 5 } nicGateway OBJECT-TYPE SYNTAX OCTET STRING (SIZE(45)) MAX-ACCESS read-only STATUS current DESCRIPTION "Gateway of the NIC." ::= { nicEntry 6 } nicNetmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(45)) MAX-ACCESS read-only STATUS current DESCRIPTION "Netmask of the NIC." ::= { nicEntry 7 } nicFqdn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(256)) MAX-ACCESS read-only STATUS current DESCRIPTION "FQDN of the NIC." ::= { nicEntry 8 } nicDns OBJECT-TYPE SYNTAX OCTET STRING (SIZE(91)) MAX-ACCESS read-only STATUS current DESCRIPTION "DNS of the NIC." ::= { nicEntry 9 } nicSpeed OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Speed of the NIC. (Unit: Mbps)" ::= { nicEntry 10 } nicDescript OBJECT-TYPE SYNTAX OCTET STRING (SIZE(255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Description of the NIC." ::= { nicEntry 11 } nicStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the NIC." ::= { nicEntry 12 } phyHddTable OBJECT-TYPE SYNTAX SEQUENCE OF HddEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of HDDs. The number of entries is given by the number of HDDs." ::= { storage 2 } hddEntry OBJECT-TYPE SYNTAX HddEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular HDD." INDEX { hddNumber } ::= { phyHddTable 1 } HddEntry ::= SEQUENCE { hddNumber Integer32, hddControllerNumber Integer32, enclosureNumber Integer32, status Integer32, temperature Integer32, capacity Integer32, vendor OCTET STRING, modelName OCTET STRING, revision OCTET STRING, sn OCTET STRING, linkSpeed Integer32, fwState Integer32, otherErrCount Integer32, predictedFailCount Integer32, mediaErrCount Integer32 } hddNumber OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each HDD. It is recommended that values are assigned contiguously starting from 1." ::= { hddEntry 1 } hddControllerNumber OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The controller that this HDD belongs to." ::= { hddEntry 2 } enclosureNumber OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The enclosure that this HDD belongs to." ::= { hddEntry 3 } status OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the HDD. 1: present 0: not present" ::= { hddEntry 4 } temperature OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Current temperature of the HDD." ::= { hddEntry 5 } capacity OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Capacity(GB) of the HDD. " ::= { hddEntry 6 } vendor OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor of the HDD." ::= { hddEntry 7 } modelName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Model name of the HDD." ::= { hddEntry 8 } revision OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Revision of the HDD." ::= { hddEntry 9 } sn OBJECT-TYPE SYNTAX OCTET STRING (SIZE(32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the HDD." ::= { hddEntry 10 } linkSpeed OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The link speed of the HDD. 0: not defined 1: 1.5Gb/s - SATA 150 2: 3.0Gb/s 3: 6.0Gb/s 4: 12.0Gb/s" ::= { hddEntry 11 } fwState OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware state of the HDD. 00: Unconfigured good drive 01: Unconfigured bad drive 02: Hot spare drive 16: Configured-good drive(data invalid) 17: Configured-bad drive (data invalid) 20: Configured-drive is rebuilding 24: Configured-drive is online 32: drive is getting copied 64: drive is exposed and controlled by host 128: UnConfigured - shielded 130: Hot Spare - shielded 144: Configured - shielded" ::= { hddEntry 12 } otherErrCount OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Other error count of the HDD." ::= { hddEntry 13 } predictedFailCount OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Predicted fail count of the HDD." ::= { hddEntry 14 } mediaErrCount OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Media error Count of the HDD." ::= { hddEntry 15 } logHddTable OBJECT-TYPE SYNTAX SEQUENCE OF VolumeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of volumes. The number of entries is given by the number of volumes." ::= { storage 3 } volumeEntry OBJECT-TYPE SYNTAX VolumeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular volume." INDEX { volNumber } ::= { logHddTable 1 } VolumeEntry ::= SEQUENCE { volNumber Integer32, volControllerNumber Integer32, volStatus Integer32, volCapacity Integer32, priRaidLevel Integer32, raidLevelQualifier Integer32, secRaidLevel Integer32, ldStripSize Integer32, numDevices Integer32, spanDepth Integer32, state Integer32, volName OCTET STRING } volNumber OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each volume. It is recommended that values are assigned contiguously starting from 1." ::= { volumeEntry 1 } volControllerNumber OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The controller that this HDD belongs to." ::= { volumeEntry 2 } volStatus OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the volume. 1: present 0: not present" ::= { volumeEntry 3 } volCapacity OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Capacity(GB) of the volume." ::= { volumeEntry 4 } priRaidLevel OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Primary raid level of the volume." ::= { volumeEntry 5 } raidLevelQualifier OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Raid level qaulifier of the volume." ::= { volumeEntry 6 } secRaidLevel OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Secondary raid level of the volume." ::= { volumeEntry 7 } ldStripSize OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "LD strip size of the volume. (per DDF: 4=8K, 5=16K, 7=64K, 11=1MB, etc.)" ::= { volumeEntry 8 } numDevices OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "number of drives per span." ::= { volumeEntry 9 } spanDepth OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Span depth of the volume." ::= { volumeEntry 10 } state OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "State of the volume. 0: offline 1: partially degraded 2: degraded 3: optimal" ::= { volumeEntry 11 } volName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the volume." ::= { volumeEntry 12 } userTable OBJECT-TYPE SYNTAX SEQUENCE OF UserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of all users." ::= { ipmi 9 } userInfo OBJECT-TYPE SYNTAX UserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular user." INDEX { id } ::= { userTable 1 } UserEntry ::= SEQUENCE { id Integer32, username OCTET STRING, password OCTET STRING, privilege Integer32 } id OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for user ID, greater than zero." ::= { userInfo 1 } username OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-write STATUS current DESCRIPTION "User name." ::= { userInfo 2 } password OBJECT-TYPE SYNTAX OCTET STRING (SIZE(20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Password." ::= { userInfo 3 } privilege OBJECT-TYPE SYNTAX Integer32 (2..4) MAX-ACCESS read-write STATUS current DESCRIPTION "User privilege." ::= { userInfo 4 } uid OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Get and set the UID status. Get case: 0 : off 1 : on Set case: 0 : off 1 : on" ::= { ipmi 10 } psuNumber OBJECT-TYPE SYNTAX Integer32 (0..8) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PSUs" ::= { powerinfo 1 } psuTable OBJECT-TYPE SYNTAX SEQUENCE OF PsuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of PSUs. The number of entries is given by the number of PSUs." ::= { powerinfo 2 } psuEntry OBJECT-TYPE SYNTAX PsuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing a particular PSU information." INDEX { psuIndex } ::= { psuTable 1 } PsuEntry ::= SEQUENCE { psuIndex Integer32, psuStatus Integer32, inputVoltage OCTET STRING, inputCurrent OCTET STRING, inputPower Integer32, outputVoltage OCTET STRING, outputCurrent OCTET STRING, outputPower Integer32, temperature1 Integer32, temperature2 Integer32, fanRPM1 Integer32, fanRPM2 Integer32, psuSerialNumber OCTET STRING } psuIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, start from one, for each PSU. It is recommended that values are assigned contiguously starting from 1." ::= { psuEntry 1 } psuStatus OBJECT-TYPE SYNTAX INTEGER { fail(0), good(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "PSU Status." ::= { psuEntry 2 } inputVoltage OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "PSU Input Voltage." ::= { psuEntry 3 } inputCurrent OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "PSU Input Current." ::= { psuEntry 4 } inputPower OBJECT-TYPE SYNTAX Integer32 (1..1048576) MAX-ACCESS read-only STATUS current DESCRIPTION "PSU Input Power." ::= { psuEntry 5 } outputVoltage OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "PSU Output Voltage." ::= { psuEntry 6 } outputCurrent OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "PSU Output Current." ::= { psuEntry 7 } outputPower OBJECT-TYPE SYNTAX Integer32 (1..1048576) MAX-ACCESS read-only STATUS current DESCRIPTION "PSU Output Power." ::= { psuEntry 8 } temperature1 OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "PSU Temperature1." ::= { psuEntry 9 } temperature2 OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "PSU Temperature2." ::= { psuEntry 10 } fanRPM1 OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "PSU Fan RPM1." ::= { psuEntry 11 } fanRPM2 OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "PSU Fan RPM2." ::= { psuEntry 12 } psuSerialNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(32)) MAX-ACCESS read-only STATUS current DESCRIPTION "PSU Serial Number." ::= { psuEntry 13 } -- -- FanMode MIB (15) -- fanMode OBJECT-TYPE SYNTAX INTEGER { standard(0), fullspeed(1), optimal(2), pue2optimal(3), heavyIO(4)} MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { ipmi 15 } -- -- FRU MIB (16) -- chassis OBJECT IDENTIFIER ::= { fruinfo 1 } board OBJECT IDENTIFIER ::= { fruinfo 2 } product OBJECT IDENTIFIER ::= { fruinfo 3 } chassisType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "FRU Chassis Type." ::= { chassis 1 } chassisPartNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "FRU Chassis Part Number" ::= { chassis 2 } chassisSerialNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "FRU Chassis Serial Number" ::= { chassis 3 } boardLanguage OBJECT-TYPE SYNTAX INTEGER { afar(1), abkhazian(2), afrikaans(3), amharic(4), arabic(5), assamese(6), aymara(7), azerbaijani(8), bashkir(9), byelorussian(10), bulgarian(11), bihari(12), bislama(13), bengali(14), tibetan(15), breton(16), catalan(17), corsican(18), czech(19), welsh(20), danish(21), german(22), bhutani(23), greek(24), english(25), esperanto(26), spanish(27), estonian(28), basque(29), persian(30), finnish(31), fiji(32), faeroese(33), french(34), frisian(35), irish(36), gaelic(37), galician(38), guarani(39), gujarati(40), hausa(41), hindi(42), croatian(43), hungarian(44), armenian(45), interlingua(46), interlingue(47), inupiak(48), indonesian(49), icelandic(50), italian(51), hebrew(52), japanese(53), yiddish(54), javanese(55), georgian(56), kazakh(57), greenlandic(58), cambodian(59), kannada(60), korean(61), kashmiri(62), kurdish(63), kirghiz(64), latin(65), lingala(66), laothian(67), lithuanian(68), lettish(69), malagasy(70), maori(71), macedonian(72), malayalam(73), mongolian(74), moldavian(75), marathi(76), malay(77), maltese(78), burmese(79), nauru(80), nepali(81), dutch(82), norwegian(83), occitan(84), oromo(85), oriya(86), punjabi(87), polish(88), pushto(89), portuguese(90), quechua(91), rhaeto-romance(92), kirundi(93), romanian(94), russian(95), kinyarwanda(96), sanskrit(97), sindhi(98), sangro(99), serbo-croatian(100), singhalese(101), slovak(102), slovenian(103), samoan(104), shona(105), somali(106), albanian(107), serbian(108), siswati(109), sesotho(110), sudanese(111), swedish(112), swahili(113), tamil(114), tegulu(115), tajik(116), thai(117), tigrinya(118), turkmen(119), tagalog(120), setswana(121), tonga(122), turkish(123), tsonga(124), tatar(125), twi(126), ukrainian(127), urdu(128), uzbek(129), vietnamese(130), volapuk(131), wolof(132), xhosa(133), yoruba(134), chinese(135), zulu(136) } MAX-ACCESS read-only STATUS current DESCRIPTION "FRU Board Language" ::= { board 1 } boardManufacturer OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "FRU Board Manufacturer" ::= { board 2 } boardProductName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "FRU Board Product Name" ::= { board 3 } boardSerialNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "FRU Board Serial Number" ::= { board 4 } boardPartNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "FRU Board part Number" ::= { board 5 } productLanguage OBJECT-TYPE SYNTAX INTEGER { afar(1), abkhazian(2), afrikaans(3), amharic(4), arabic(5), assamese(6), aymara(7), azerbaijani(8), bashkir(9), byelorussian(10), bulgarian(11), bihari(12), bislama(13), bengali(14), tibetan(15), breton(16), catalan(17), corsican(18), czech(19), welsh(20), danish(21), german(22), bhutani(23), greek(24), english(25), esperanto(26), spanish(27), estonian(28), basque(29), persian(30), finnish(31), fiji(32), faeroese(33), french(34), frisian(35), irish(36), gaelic(37), galician(38), guarani(39), gujarati(40), hausa(41), hindi(42), croatian(43), hungarian(44), armenian(45), interlingua(46), interlingue(47), inupiak(48), indonesian(49), icelandic(50), italian(51), hebrew(52), japanese(53), yiddish(54), javanese(55), georgian(56), kazakh(57), greenlandic(58), cambodian(59), kannada(60), korean(61), kashmiri(62), kurdish(63), kirghiz(64), latin(65), lingala(66), laothian(67), lithuanian(68), lettish(69), malagasy(70), maori(71), macedonian(72), malayalam(73), mongolian(74), moldavian(75), marathi(76), malay(77), maltese(78), burmese(79), nauru(80), nepali(81), dutch(82), norwegian(83), occitan(84), oromo(85), oriya(86), punjabi(87), polish(88), pushto(89), portuguese(90), quechua(91), rhaeto-romance(92), kirundi(93), romanian(94), russian(95), kinyarwanda(96), sanskrit(97), sindhi(98), sangro(99), serbo-croatian(100), singhalese(101), slovak(102), slovenian(103), samoan(104), shona(105), somali(106), albanian(107), serbian(108), siswati(109), sesotho(110), sudanese(111), swedish(112), swahili(113), tamil(114), tegulu(115), tajik(116), thai(117), tigrinya(118), turkmen(119), tagalog(120), setswana(121), tonga(122), turkish(123), tsonga(124), tatar(125), twi(126), ukrainian(127), urdu(128), uzbek(129), vietnamese(130), volapuk(131), wolof(132), xhosa(133), yoruba(134), chinese(135), zulu(136) } MAX-ACCESS read-only STATUS current DESCRIPTION "FRU Product Language" ::= { product 1 } productManufacturer OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "FRU Product Manufacturer" ::= { product 2 } productName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "FRU Product Name" ::= { product 3 } productPartNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "FRU Product Part Number" ::= { product 4 } productVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "FRU Product Version" ::= { product 5 } productSerialNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "FRU Product Serial Number" ::= { product 6 } productAssetTag OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-write STATUS current DESCRIPTION "FRU Product Asset Tag" ::= { product 7 } -- -- NTP INFO MIB (17) -- timeZone OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5)) MAX-ACCESS read-only STATUS current DESCRIPTION "Get and set time zone. Get/Set case: -1200 -1100 -1000 -0930 -0900 -0800 -0700 -0600 -0500 -0430 -0400 -0330 -0300 -0230 -0200 -0100 +0000 +0100 +0200 +0300 +0330 +0400 +0430 +0500 +0530 +0545 +0600 +0630 +0700 +0800 +0900 +0930 +1000 +1030 +1100 +1130 +1200 +1300 +1400" ::= { ntpinfo 1 } ntpEnable OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Get and set NTP status. Get case: 0 : off 1 : on Set case: 0 : off 1 : on" ::= { ntpinfo 2 } primaryNTPServer OBJECT-TYPE SYNTAX OCTET STRING (SIZE(127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Get and set primary NTP server" ::= { ntpinfo 3 } secondaryNTPServer OBJECT-TYPE SYNTAX OCTET STRING (SIZE(127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Get and set secondary NTP server" ::= { ntpinfo 4 } dst OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Get and set daylight saving time status Get case: 0 : off 1 : on Set case: 0 : off 1 : on" ::= { ntpinfo 5 } selTable OBJECT-TYPE SYNTAX SEQUENCE OF SelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table displays a record of critical system events from the monitored system." ::= { ipmi 18 } selEntry OBJECT-TYPE SYNTAX SelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry event logs indicate the time when a critical condition occurred and the time it was resolved" INDEX { selEid } ::= { selTable 1 } SelEntry ::= SEQUENCE { selEid Integer32, selTimeStamp DateAndTime, selSensorName OCTET STRING, selSensorType OCTET STRING, selDescription OCTET STRING, selRawData OCTET STRING } selEid OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-only STATUS current DESCRIPTION "system event log EID" ::= { selEntry 1 } selTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "System event log trigger time" ::= { selEntry 2 } selSensorName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "System evnet log sensor name" ::= { selEntry 3 } selSensorType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(64)) MAX-ACCESS read-only STATUS current DESCRIPTION "System evnet log sensor type" ::= { selEntry 4 } selDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(512)) MAX-ACCESS read-only STATUS current DESCRIPTION "System evnet log description" ::= { selEntry 5 } selRawData OBJECT-TYPE SYNTAX OCTET STRING (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "System evnet log raw data" ::= { selEntry 6 } alertTable OBJECT-TYPE SYNTAX SEQUENCE OF AlertEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of all alerts." ::= { ipmi 11 } alertInfo OBJECT-TYPE SYNTAX AlertEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular alert." INDEX { id } ::= { alertTable 1 } AlertEntry ::= SEQUENCE { alertNo Integer32, alertLevel OCTET STRING, destinationAddress OCTET STRING } alertNo OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for alert ID, greater than zero." ::= { alertInfo 1 } alertLevel OBJECT-TYPE SYNTAX OCTET STRING (SIZE(25)) MAX-ACCESS read-only STATUS current DESCRIPTION "Alert Level." ::= { alertInfo 2 } destinationAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(270)) MAX-ACCESS read-only STATUS current DESCRIPTION "Alert Level." ::= { alertInfo 3 } -- -- Network MIB (21) -- ipv4DNSServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 dns server." ::= { network 1 } ipv4Gateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 gateway" ::= { network 2 } ipv6DNSServer OBJECT-TYPE SYNTAX OCTET STRING (SIZE(45)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv6 dns server." ::= { network 3 } ipv6DUID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv6 DUID" ::= { network 4 } dhcpv6State OBJECT-TYPE SYNTAX INTEGER { stateless(0) , stateful(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "DHCPv6 State" ::= { network 5 } hostname OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "BMC hostname" ::= { network 6 } dhcpEnabled OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "DHCP enabled" ::= { network 7 } vlanIDEnabled OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "VLan enabled" ::= { network 8 } vlanID OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "Vlan ID" ::= { network 9 } lanInterface OBJECT-TYPE SYNTAX INTEGER { dedicated(0) , shared(1) ,failover(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "the current Lan interface" ::= { network 10 } rmcpPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IPMI port number" ::= { network 11 } activeLanInterface OBJECT-TYPE SYNTAX INTEGER { dedicated(0) , shared(1) ,failover(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "which Lan interface is active." ::= { network 12 } dedicatedLanDuplex OBJECT-TYPE SYNTAX INTEGER { unknown(0), fullduplex(1) , halfduplex(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Duplex Mode of the dedicated Lan" ::= { network 13 } sharedLanDuplex OBJECT-TYPE SYNTAX INTEGER { unknown(0), fullduplex(1) , halfduplex(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Duplex Mode of the share Lan" ::= { network 14 } -- -- SMTP MIB (22) -- smtpEnabled OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "enable Email server " ::= { smtp 1 } smtpServer OBJECT-TYPE SYNTAX OCTET STRING (SIZE(255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Email server" ::= { smtp 2 } smtpPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "the port number of the email server" ::= { smtp 3 } smtpUsername OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "the username for email server's authentication" ::= { smtp 4 } smtpSenderEmail OBJECT-TYPE SYNTAX OCTET STRING (SIZE(63)) MAX-ACCESS read-only STATUS current DESCRIPTION "the sender's email address" ::= { smtp 5 } -- -- MouseMode MIB (23) -- mouseMode OBJECT-TYPE SYNTAX INTEGER { absolute(1), relative(2), single(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "the port number of the email server" ::= { ipmi 23 } -- -- BootOrder MIB (24) -- sysBootOrder OBJECT-TYPE SYNTAX INTEGER { none(0), pxe(1), hdd(2), diags(3), cdDvd(4), biosSetup(5), floppy(6), usbKey(7), usbHdd(8), usbFloppy(9), usbCD(10), uefiUsbKey(11), uefiCD(12), uefiHdd(13), uefiUsbHdd(14), uefiUsbCD(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "One time change system boot order." ::= { ipmi 24 } -- -- NVMe MIB (19) -- nvmeCtrlTbl OBJECT-TYPE SYNTAX SEQUENCE OF NVMeCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of NVMe controllers. The number of entries is given by the number of controllers." ::= { nvme 1 } nvmeCtrlEntry OBJECT-TYPE SYNTAX NVMeCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing a particular NVMe controller information." INDEX { nvmeCtrlPresent } ::= { nvmeCtrlTbl 1 } NVMeCtrlEntry ::= SEQUENCE { nvmeCtrlPresent Integer32, maxTemp Integer32, maxSlotNum Integer32, onboard Integer32, driverIndex Integer32, cpldVer OCTET STRING } nvmeCtrlPresent OBJECT-TYPE SYNTAX INTEGER { absent(0), present(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe controllor present or not." ::= { nvmeCtrlEntry 1 } maxTemp OBJECT-TYPE SYNTAX Integer32 (1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum temperature from all existed NVMe drives." ::= { nvmeCtrlEntry 2 } maxSlotNum OBJECT-TYPE SYNTAX Integer32 (0..31) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum slot number at each group." ::= { nvmeCtrlEntry 3 } onboard OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe controller type." ::= { nvmeCtrlEntry 4 } driverIndex OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe BPN driver index." ::= { nvmeCtrlEntry 5 } cpldVer OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "CPLD FW version of this NVMe controller." ::= { nvmeCtrlEntry 6 } nvmeDriveTbl OBJECT-TYPE SYNTAX SEQUENCE OF NVMeDriveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of NVMe drives. The number of entries is given by the number of drives." ::= { nvme 2 } nvmeDriveEntry OBJECT-TYPE SYNTAX NVMeDriveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing a particular NVMe drive information." INDEX { slotId } ::= { nvmeDriveTbl 1 } NVMeDriveEntry ::= SEQUENCE { slotId Integer32, groupId Integer32, nvmeDrivePresent Integer32, locate Integer32, save2Remove Integer32, vmdMode Integer32, temp Integer32, classCode OCTET STRING, vendorID OCTET STRING, serialNum OCTET STRING, modelNum OCTET STRING, port0MaxLinkSpd OCTET STRING, port0MaxLinkWidth OCTET STRING, port1MaxLinkSpd OCTET STRING, port1MaxLinkWidth OCTET STRING, initPowerRequirement Integer32, maxPowerRequirement Integer32 } slotId OBJECT-TYPE SYNTAX Integer32 (0..31) MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe Slot ID at one group." ::= { nvmeDriveEntry 1 } groupId OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Group ID at this slot." ::= { nvmeDriveEntry 2 } nvmeDrivePresent OBJECT-TYPE SYNTAX INTEGER { absent(0), present(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe drive presence at this slot." ::= { nvmeDriveEntry 3 } locate OBJECT-TYPE SYNTAX INTEGER { dislocate(0), locate(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe drive locate/dislocate status at this slot." ::= { nvmeDriveEntry 4 } save2Remove OBJECT-TYPE SYNTAX INTEGER { not-ready(0), ready(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe drive save2Remove status at this slot." ::= { nvmeDriveEntry 5 } vmdMode OBJECT-TYPE SYNTAX INTEGER { vmd-off(0), vmd-on(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe drive vmdMode status at this slot." ::= { nvmeDriveEntry 6 } temp OBJECT-TYPE SYNTAX Integer32 (0..127) MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe drive temperature at this slot." ::= { nvmeDriveEntry 7 } classCode OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe drive class code at this slot." ::= { nvmeDriveEntry 8 } vendorID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe drive class code at this slot." ::= { nvmeDriveEntry 9 } serialNum OBJECT-TYPE SYNTAX OCTET STRING (SIZE(20)) MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe drive serial number at this slot." ::= { nvmeDriveEntry 10 } modelNum OBJECT-TYPE SYNTAX OCTET STRING (SIZE(40)) MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe drive model number at this slot." ::= { nvmeDriveEntry 11 } port0MaxLinkSpd OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe drive port0 max link speed at this slot." ::= { nvmeDriveEntry 12 } port0MaxLinkWidth OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe drive port0 max link width at this slot." ::= { nvmeDriveEntry 13 } port1MaxLinkSpd OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe drive port1 max link speed at this slot." ::= { nvmeDriveEntry 14 } port1MaxLinkWidth OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "NVMe drive port1 max link width at this slot." ::= { nvmeDriveEntry 15 } initPowerRequirement OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Initial power requirment (Watts)." ::= { nvmeDriveEntry 16 } maxPowerRequirement OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum power requirment (Watts)." ::= { nvmeDriveEntry 17 } guid NOTIFICATION-TYPE STATUS current DESCRIPTION "GUID." ::= { ipmi 30 } END