ALPHA-CONVERTER-SYS-MIB DEFINITIONS ::= BEGIN

 --==========================================================================
 --
 -- Alpha Technologies Ltd.
 -- Copyright 2014
 --                      
 --==========================================================================

 IMPORTS
  MODULE-IDENTITY, OBJECT-TYPE
   FROM SNMPv2-SMI  
  ScaledNumber, simple
   FROM ALPHA-RESOURCE-MIB
     MODULE-COMPLIANCE, OBJECT-GROUP
         FROM SNMPv2-CONF;  
         
         
 converterSystem MODULE-IDENTITY
  LAST-UPDATED "201507280000Z"
  ORGANIZATION "Alpha Technologies Ltd."
  CONTACT-INFO
      "Alpha Technologies Ltd.
     7700 Riverfront Gate
     Burnaby, BC  V5J 5M4
     Canada

     Tel: 1-604-436-5900
     Fax: 1-604-436-1233"
  DESCRIPTION
    "This MIB defines the notification block(s) available in system controllers."

  REVISION    "201507280000Z"  -- July 28, 2015
  DESCRIPTION
   "
   Updated to follow MIB structure conformance rules.  Tested with 
   SimpleWeb: http://www.simpleweb.org      
   Passed highest level of compliance.  (level 6)
   "
                                  
  REVISION    "201507230000Z"  -- July 23, 2015
  DESCRIPTION
   "Fixed MIB syntax warnings."

  REVISION    "201506230000Z"  -- June 23, 2015
  DESCRIPTION
   "General revision."        
 ::= { simple 2 }
                         

   convSysTotalOutputCurrent OBJECT-TYPE
       SYNTAX      ScaledNumber
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "Total converter output current in AMPS."
       ::= { converterSystem 1 }       
       
   convSysTotalOutputPower OBJECT-TYPE
       SYNTAX      ScaledNumber
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "Total converter output power in WATTS."
       ::= { converterSystem 2 }
       
   convSysTotalCapacityInstalledAmps OBJECT-TYPE
       SYNTAX      ScaledNumber
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "A converter output current multiplied by the number of converters installed."
       ::= { converterSystem 3 }

   convSysTotalCapacityInstalledPower OBJECT-TYPE
       SYNTAX      ScaledNumber
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "A converter output power multiplied by the number of converters installed."
       ::= { converterSystem 4 }

   convSysAverageConverterOutputVoltage OBJECT-TYPE
       SYNTAX      ScaledNumber
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "Average converter output voltage."
       ::= { converterSystem 5 }
  
   convSysAverageConverterInputVoltage OBJECT-TYPE
       SYNTAX      ScaledNumber
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "Average input voltage supplied to the converters."
       ::= { converterSystem 6 }
  
   convSysSystemVoltage OBJECT-TYPE
       SYNTAX      ScaledNumber
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "System voltage."
       ::= { converterSystem 7 }

   convSysTotalLoadCurrent OBJECT-TYPE
       SYNTAX      ScaledNumber
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "Total load current."
       ::= { converterSystem 8 }
       
   convSysSystemNumber OBJECT-TYPE
       SYNTAX      ScaledNumber
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "Snmp ID# assigned to the system."
       ::= { converterSystem 9 }
                                         
                                         
                                      
 -- Conformance                                      
                                      
 conformance OBJECT IDENTIFIER ::= { converterSystem 100 }
 
 compliances OBJECT IDENTIFIER ::= { conformance 1 }
 
 compliance MODULE-COMPLIANCE
       STATUS  current
       DESCRIPTION
           "The compliance statement for systems supporting the Alpha Converter System MIB."
       MODULE -- this module
           MANDATORY-GROUPS {
    converterGroup
           }               
    ::= { compliances 1 }
 
 converterGroups OBJECT IDENTIFIER ::= { conformance 2 }
         
 converterGroup OBJECT-GROUP
     OBJECTS {      
       convSysTotalOutputCurrent,
       convSysTotalOutputPower,
       convSysTotalCapacityInstalledAmps,
       convSysTotalCapacityInstalledPower,
       convSysAverageConverterOutputVoltage,
       convSysAverageConverterInputVoltage,
       convSysSystemVoltage,
       convSysTotalLoadCurrent,
       convSysSystemNumber
  }
  STATUS   current
  DESCRIPTION
       "Alpha converter System data list group."
  ::= { converterGroups 1 }
           
                                         
                                         
END