ALPHA-RESOURCE-MIB DEFINITIONS ::= BEGIN

 --==========================================================================
 --
 -- Alpha Technologies Ltd.
 -- Copyright 2019
 --                      
 --==========================================================================

 IMPORTS
  MODULE-IDENTITY, OBJECT-TYPE, enterprises,
   Unsigned32, Integer32
   FROM SNMPv2-SMI          -- [RFC2578]               
  TEXTUAL-CONVENTION
   FROM SNMPv2-TC           -- [RFC2579]        
     MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF;      

 alpha MODULE-IDENTITY
  LAST-UPDATED "201904120000Z"
  ORGANIZATION "Alpha Technologies Ltd."
  CONTACT-INFO
     "Alpha Technologies Ltd.
    7700 Riverfront Gate
    Burnaby, BC  V5J 5M4
    Canada

    Tel: 1-604-436-5900
    Fax: 1-604-436-1233"         
  DESCRIPTION
     "This MIB defines the information block(s) available in system controllers."         
  
  REVISION "201904120000Z"  -- April 12, 2019
  DESCRIPTION
   "Added alert table and conformance group.
   Tested with SimpleWeb: http://www.simpleweb.org      
   Passed highest level of compliance.  (level 6)
   "
    
  REVISION "201611150000Z"  -- November 15, 2016
  DESCRIPTION
   "Added conformance group for alarms to follow MIB structure conformance rules. Tested with
   SimpleWeb: http://www.simpleweb.org      
   Passed highest level of compliance.  (level 6)
   "
  
  REVISION    "201510190000Z"  -- October 19, 2015
  DESCRIPTION
   "
   Added alarm table(s) to allow active polling of alarm states available in the Cordex HP.
   "

  REVISION    "201507280000Z"  -- July 28, 2015
  DESCRIPTION
   "
   Updated to follow MIB structure conformance rules.  Tested with 
   SimpleWeb: http://www.simpleweb.org      
   Passed highest level of compliance.  (level 6)
   "
   
  REVISION    "201506230000Z"  -- June 23, 2015
  DESCRIPTION
   "General version, Cordex HP Controller"
   
 ::= { enterprises 7309 }


 -- Textual convention
 
 ScaledNumber ::= TEXTUAL-CONVENTION
 DISPLAY-HINT  "d-3"
 STATUS    current
 DESCRIPTION
 "
 Fixed point, 3 decimal places.
 "
 SYNTAX    Integer32       
                                      
 controller   OBJECT IDENTIFIER ::= { alpha 5 } 
 controllerInfo  OBJECT IDENTIFIER ::= { controller 1 } 
 
  resource   OBJECT IDENTIFIER ::= { controller 2 }  
  simple    OBJECT IDENTIFIER ::= { controller 3 }      
                                                               
                                                              
 -- Well known data points for controller level information.  
    -----------------------------------------------------------
         
  controllerInfoName OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..64))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "User configurable text name of the Controller."
    ::= { controllerInfo 1 }

  controllerInfoDescription OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..256))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "User configurable description of the Controller."
    ::= { controllerInfo 2 }       
    
    controllerInfoSoftwareVersion OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Software version of the Controller application."
    ::= { controllerInfo 3 }  
                                  
    controllerInfoOperatingSystemVersion OBJECT-TYPE
    SYNTAX      OCTET STRING 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Operating system version number."
    ::= { controllerInfo 4 }                                    
                                
    controllerInfoHardwareVersion OBJECT-TYPE
    SYNTAX      OCTET STRING 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Hardware version number."
    ::= { controllerInfo 5 }                                    
                                   
    -- Table for all general controller information.  Table Identifier starts at 100.
                                   
    controllerExtInfoTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF ControllerExtInfoEntry  
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Controller specific information table.
        "
     ::= { controllerInfo 100 }

    controllerExtInfoEntry OBJECT-TYPE
     SYNTAX      ControllerExtInfoEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Entries appear in this table for each possible alarm state.
        This table MUST be persistent across system reboots.
        "
     INDEX       { controllerExtInfoIndex }
     ::= { controllerExtInfoTable 1 }

 ControllerExtInfoEntry ::= SEQUENCE {
    controllerExtInfoIndex             Unsigned32,
    controllerExtInfoName              OCTET STRING, 
    controllerExtInfoStringValue       OCTET STRING,
    controllerExtInfoUnit     OCTET STRING,
    controllerExtInfoNumberValue   ScaledNumber
    }

 controllerExtInfoIndex OBJECT-TYPE
  SYNTAX Unsigned32 (1..4294967295)
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION 
  "
  Incremental integer value for each instance of the .
  "
 ::= { controllerExtInfoEntry 1 }  
 
 controllerExtInfoName OBJECT-TYPE
     SYNTAX OCTET STRING 
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
     "
     Name of the data value presented in the instance of the entry.
     "
 ::= { controllerExtInfoEntry 2 }
                                            
 controllerExtInfoStringValue OBJECT-TYPE
     SYNTAX OCTET STRING (SIZE(0..64))
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
     "
     String value of the data field presented by the controller info entry.
     "
 ::= { controllerExtInfoEntry 3 }      
 
 controllerExtInfoUnit OBJECT-TYPE
     SYNTAX OCTET STRING (SIZE(0..10))
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
     "
     Unit name of the numeric value of the controller info entry.
     "
 ::= { controllerExtInfoEntry 4 }       
                     
 controllerExtInfoNumberValue OBJECT-TYPE
  SYNTAX ScaledNumber
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION 
  "
  Number value of the data field presented by the controller info entry.
  "
 ::= { controllerExtInfoEntry 5 }                        
                      
    -- Resource
    -----------
                   
                   
 -- Component Table                   
                   
    componentList    OBJECT IDENTIFIER ::=  { resource 1 }                        
                            
    componentListCount OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION 
  "
  The number of available objects in componentList.
  "
 ::= { componentList 1 }               
                  
    componentListTable  OBJECT-TYPE
     SYNTAX      SEQUENCE OF ComponentListEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Object componentList describes the following:
  
   Systems ( DC System, AC System, Converter System, etc. )
   Devices ( ADIO, Rectifier, Converter, Inverter, etc. )
        "
     ::= { componentList 2 }
                                        
 componentListEntry OBJECT-TYPE
  SYNTAX      ComponentListEntry               
   MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Entry to the component list describing the available systems and devices
        within the Cordex controller.
        
        Indexing:
        
        1. Component type - please refer to componentListType
        2. Snmp ID - please refer to componentListReference
                 
         Configurable ID allow for component monitoring on a specific index if the 
         method of monitoring is locked on the index value.
        "
     INDEX       { componentListType, componentListReference }
     ::= { componentListTable 1 }
  
 
 ComponentListEntry ::= SEQUENCE {
    componentListReference           Unsigned32,
    componentListStaticName        OCTET STRING, 
    componentListConfiguredName  OCTET STRING,
    componentListType         Unsigned32, 
    componentListModelNumber   OCTET STRING,
    componentListSerialNumber  OCTET STRING,
    componentListSystemPointer  OBJECT IDENTIFIER
    }  
    
 componentListReference OBJECT-TYPE
  SYNTAX Unsigned32 (1..4294967295)
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION 
  "
  Indentification number assigned to the component." 
 ::= { componentListEntry 1 }  
 
 componentListStaticName OBJECT-TYPE
     SYNTAX OCTET STRING 
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
     "
     Non-configurable name permanently assigned to the component.  Filtering on this data
     value is possible and recommended due to its static nature.
     "
 ::= { componentListEntry 2 }                
 
 componentListConfiguredName OBJECT-TYPE
     SYNTAX OCTET STRING (SIZE(0..32))
     MAX-ACCESS read-write
     STATUS current
     DESCRIPTION
     "
     User configurable name of the component. Filtering on this data value is not
     recommended.
     "
 ::= { componentListEntry 3 }
 
 componentListType OBJECT-TYPE
  SYNTAX Unsigned32 (1..4294967295)
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION 
  "
  The type of the component based on power system terminology.
  
        1  - Controller
         2  - DC System
         3  - ADIO
         4  - Rectifier
         5  - Converter
         6  - Inverter
         7  - BCMC
         8  - T2S
         9  - AC Input Bus
         10 - Battery String
         11 - Disconnect
         12 - Load
         13 - Shunt
         14 - SNMP Destinations
         15 - CAN Bus
   
   See SNMP Integrators Guide for complete list www.alpha.ca
  "
 ::= { componentListEntry 4 }  
 
 componentListModelNumber OBJECT-TYPE
     SYNTAX OCTET STRING (SIZE(0..32))
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
     "
     Component model number where applicable.  This is available on component entries
     which describes hardware modules.
     "
 ::= { componentListEntry 5 } 
 
 componentListSerialNumber OBJECT-TYPE
     SYNTAX OCTET STRING (SIZE(0..32))
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
     "
     Serial number of the device only if the component is of physical device type.
     "
 ::= { componentListEntry 6 }
                            
 componentListSystemPointer OBJECT-TYPE
     SYNTAX OBJECT IDENTIFIER 
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
     "
     Table entry reference to the component table of the system component that the
     described item belongs to.
     
     Example:  A rectifier component will have a reference to the Rectifier System that it
     belongs to.
     "
 ::= { componentListEntry 7 }

            
 -- Data List            

    dataList    OBJECT IDENTIFIER ::=  { resource 2 }                        
                            
    dataListCount OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION 
  "The number of defined data fields available for query."
 ::= { dataList 1 }               
                  
    dataListTable  OBJECT-TYPE
     SYNTAX      SEQUENCE OF DataListEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Table of data fields available for query.  
        "
     ::= { dataList 2 }
                                        
 dataListEntry OBJECT-TYPE
  SYNTAX      DataListEntry               
   MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Data field entry of available fields.  
        
        Indexes:
        
         1. componentListType - indicates which component can provide the field of 
                 interest.
         2. dataListReference - the ID permanently assigned to the field.
        "
     INDEX       { componentListType, dataListReference }
     ::= { dataListTable 1 }
  
 
 DataListEntry ::= SEQUENCE {
    dataListReference  Unsigned32,
    dataListName         OCTET STRING,
    dataListType    Unsigned32,
    dataListUnit    OCTET STRING
    }  
    
 dataListReference OBJECT-TYPE
  SYNTAX Unsigned32 (1..4294967295) 
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION 
  "
  Non-configurable ID permanently assigned to the field entry.
  "
 ::= { dataListEntry 1 }  
 
 
 dataListName OBJECT-TYPE
     SYNTAX OCTET STRING (SIZE(0..32))
     MAX-ACCESS read-write
     STATUS current
     DESCRIPTION
     "
     Non-configurable string name of the field represented in the entry.
     "
 ::= { dataListEntry 2 }    
 
 dataListType OBJECT-TYPE
  SYNTAX Unsigned32 (1..4294967295)
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION 
  "
  Canonical data type of the field entry.  
  
  0 - None  
        1 - Numeric
        2 - Boolean
        3 - Time
        4 - String
        5 - Choice / Selected options     
  "
 ::= { dataListEntry 3 }  

 dataListUnit OBJECT-TYPE
     SYNTAX OCTET STRING
     MAX-ACCESS read-write
     STATUS current
     DESCRIPTION
     "
     Unit type of the value represented by the entry.
     "
 ::= { dataListEntry 4 } 
                                                        
                                                        
 -- Data Entry                                                        
                                                        
    data    OBJECT IDENTIFIER ::=  { resource 3 }                        
                            
    dataCount OBJECT-TYPE
  SYNTAX Integer32 
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION 
  "The number of defined data points available for query."
 ::= { data 1 }               
                  
    dataTable  OBJECT-TYPE
     SYNTAX      SEQUENCE OF DataEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "Table of data values associated to live data availabe from the Cordex HP controller."
     ::= { data 2 }
                                        
 dataEntry OBJECT-TYPE
  SYNTAX      DataEntry               
   MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "Conceptual row of data value for the referencing data field type and component that it belongs to."
     INDEX       { componentListType, dataListReference, componentListReference }
     ::= { dataTable 1 }
  
 
 DataEntry ::= SEQUENCE {        
     dataReference      Unsigned32,
     dataNumberValue      ScaledNumber,
     dataStringValue   OCTET STRING
     }  
                        
 dataReference OBJECT-TYPE
  SYNTAX Unsigned32 (1..4294967295) 
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION 
  "
  Non-configurable ID permanently assigned to the field entry.
  "
 ::= { dataEntry 1 }  
                        
                        
 dataNumberValue OBJECT-TYPE
  SYNTAX ScaledNumber
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION 
  "
  Numeric value of the data field.
  "
 ::= { dataEntry 2 } 
   
 dataStringValue OBJECT-TYPE
     SYNTAX OCTET STRING (SIZE(0..128))
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
     "
     String value of the data field.
     "
 ::= { dataEntry 3 } 
           
           
 -- Configuration
 ----------------
                         
    configurationList    OBJECT IDENTIFIER ::=  { resource 4 }                        
                            
    configurationListCount OBJECT-TYPE
  SYNTAX Integer32 
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION 
  "The number of defined configuration fields available for query."
 ::= { configurationList 1 }               
                  
    configurationListTable  OBJECT-TYPE
     SYNTAX      SEQUENCE OF ConfigurationListEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Table of configuration entries.
        "
     ::= { configurationList 2 }
                                        
 configurationListEntry OBJECT-TYPE
  SYNTAX      ConfigurationListEntry               
   MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Configuration field entries available for GET and SET.
        "
     INDEX       { componentListType, configurationListReference }
     ::= { configurationListTable 1 }
  
 
 ConfigurationListEntry ::= SEQUENCE {
    configurationListReference       Unsigned32,
    configurationListName         OCTET STRING,
    configurationListType      Integer32, 
    configurationListUnit    OCTET STRING
    }  
    
 configurationListReference OBJECT-TYPE
  SYNTAX Unsigned32 (1..4294967295) 
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION 
  "
  A numerical ID value permanently assigned to the configuration field.
  "
 ::= { configurationListEntry 1 }  
 
 configurationListName OBJECT-TYPE
     SYNTAX OCTET STRING (SIZE(0..32))
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
     "
     A non-configurable string name of the configuration field.
     "
 ::= { configurationListEntry 2 }  
 
 configurationListType OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION 
  "
  Conanical data type of the configuration field.    
  
  0 - Unknown  
        1 - Numeric
        2 - Boolean
        3 - Time
        4 - String
        5 - Choice / Selected Options      
  "
 ::= { configurationListEntry 3 }  
 
 configurationListUnit OBJECT-TYPE
     SYNTAX OCTET STRING (SIZE(0..10))
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
     "
     Unit of the numeric value of the configuration field.
     "
 ::= { configurationListEntry 4 } 
    
    
 -- Configuration Fields    
                   
    configuration    OBJECT IDENTIFIER ::=  { resource 5 }                        
                            
    configurationCount OBJECT-TYPE
  SYNTAX Integer32 
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION 
  "
  The number of defined configuration points available for query.
  "
 ::= { configuration 1 }               
                  
    configurationTable  OBJECT-TYPE
     SYNTAX      SEQUENCE OF ConfigurationEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Table of configuration entries.
        "
     ::= { configuration 2 }
                                        
 configurationEntry OBJECT-TYPE
  SYNTAX      ConfigurationEntry               
   MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Configuration field entry.
        "
     INDEX       { componentListType, configurationListReference, componentListReference }
     ::= { configurationTable 1 }
  
 
 ConfigurationEntry ::= SEQUENCE {   
  configurationReference    Unsigned32,
     configurationNumberValue       ScaledNumber,
     configurationStringValue   OCTET STRING
     }  
                                         
 configurationReference OBJECT-TYPE
  SYNTAX Unsigned32 (1..4294967295) 
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION 
  "
  Non-configurable ID permanently assigned to the field entry.
  "
 ::= { configurationEntry 1 }  
                                         
 configurationNumberValue OBJECT-TYPE
  SYNTAX ScaledNumber 
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION 
  "
  Numbered value of the configuration referenced by the Configuration Type and the Component Reference.
  "
 ::= { configurationEntry 2 }
 
 configurationStringValue OBJECT-TYPE
     SYNTAX OCTET STRING (SIZE(0..128))
     MAX-ACCESS read-write
     STATUS current
     DESCRIPTION
     "
     String value of the configuration referenced by the Configuration Type and the Component Reference.
     "
 ::= { configurationEntry 3 } 
                                      
               
 -- Commands
 -----------    
                         
    commandList    OBJECT IDENTIFIER ::=  { resource 6 }                        
                            
    commandListCount OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION 
  "The number of defined data points available for query."
 ::= { commandList 1 }               
                  
    commandListTable  OBJECT-TYPE
     SYNTAX      SEQUENCE OF CommandListEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Table of commands available from the Cordex HP Controller.
        "
     ::= { commandList 2 }
                                        
 commandListEntry OBJECT-TYPE
  SYNTAX      CommandListEntry               
   MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Conceptual row of a command item in the Command List Table.
        "
     INDEX       { componentListType, commandListReference }
     ::= { commandListTable 1 }
  
 
 CommandListEntry ::= SEQUENCE {
    commandListReference     Unsigned32,
    commandListName        OCTET STRING
    }  
    
 commandListReference OBJECT-TYPE
  SYNTAX Unsigned32 (1..4294967295)
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION 
  "
  Reference value to identify available commands published by the Cordex HP Controller.
  "
 ::= { commandListEntry 1 }  
 
 commandListName OBJECT-TYPE
     SYNTAX OCTET STRING (SIZE(0..32))
     MAX-ACCESS read-write
     STATUS current
     DESCRIPTION
     "
     Name of the command.
     "
 ::= { commandListEntry 2 }

                   
    command    OBJECT IDENTIFIER ::=  { resource 7 }                        
                            
    commandCount OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION 
  "The number of defined command points available for query."
 ::= { command 1 }               
                  
    commandTable  OBJECT-TYPE
     SYNTAX      SEQUENCE OF CommandEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Table of command fields that are available in the Cordex HP Controller.
        "
     ::= { command 2 }
                                        
 commandEntry OBJECT-TYPE
  SYNTAX      CommandEntry               
   MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Conceptual row of the Command Table.
        "
     INDEX       { componentListType, commandListReference, componentListReference }
     ::= { commandTable 1 }
  
 
 CommandEntry ::= SEQUENCE {  
  commandReference       Unsigned32,
     commandTrigger         Integer32    
     }  
                                         
 commandReference OBJECT-TYPE
  SYNTAX Unsigned32 (1..4294967295) 
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION 
  "
  Non-configurable ID permanently assigned to the field entry.
  "
 ::= { commandEntry 1 }  
 
 commandTrigger OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION 
  "
  Command field that is the trigger to send command referenced by the Command Type and the Component that it belongs to.
  "
 ::= { commandEntry 2 }  
     
                    
 -- Alarms
 -----------    
                         
    alarmType    OBJECT IDENTIFIER ::=  { resource 8 }                        
                            
    alarmTypeCount OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION 
  "The number of defined alarm points available for query."
 ::= { alarmType 1 }               
                  
    alarmTypeTable  OBJECT-TYPE
     SYNTAX      SEQUENCE OF AlarmTypeEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Table of alarms available from the Cordex HP Controller.
        "
     ::= { alarmType 2 }
                                        
 alarmTypeEntry OBJECT-TYPE
  SYNTAX      AlarmTypeEntry               
   MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Conceptual row of a alarm item in the Alarm List Table.
        "
     INDEX       { componentListType, alarmTypeReference }
     ::= { alarmTypeTable 1 }
  
 
 AlarmTypeEntry ::= SEQUENCE {
    alarmTypeReference     Unsigned32,
    alarmTypeName        OCTET STRING
    }  
    
 alarmTypeReference OBJECT-TYPE
  SYNTAX Unsigned32 (1..4294967295)
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION 
  "
  Reference value to identify available alarms published by the Cordex HP Controller.
  "
 ::= { alarmTypeEntry 1 }  
 
 alarmTypeName OBJECT-TYPE
     SYNTAX OCTET STRING (SIZE(0..256))
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
     "
     Name of the alarm.
     "
 ::= { alarmTypeEntry 2 }

    alarm    OBJECT IDENTIFIER ::=  { resource 9 }                        
                            
    alarmCount OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION 
  "The number of defined alarm points available for query."
 ::= { alarm 1 }               
                  
    alarmTable  OBJECT-TYPE
     SYNTAX      SEQUENCE OF AlarmEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Table of alarm fields that are available in the Cordex HP Controller.
        "
     ::= { alarm 2 }
                                        
 alarmEntry OBJECT-TYPE
  SYNTAX      AlarmEntry               
   MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Conceptual row of the Alarm Table.
        "
     INDEX       { componentListType, alarmTypeReference, componentListReference }
     ::= { alarmTable 1 }
  
 
 AlarmEntry ::= SEQUENCE {  
  alarmState      Unsigned32
     }  
                                         
 alarmState OBJECT-TYPE
  SYNTAX Unsigned32 (1..128) 
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION 
  "
  Integer representation of the state of the alarm and its priority level.
  0 - Normal
  1 - Warning
  2 - Minor
  3 - Major
  4 - Critical
  "
 ::= { alarmEntry 1 }  
 
 alert    OBJECT IDENTIFIER ::=  { resource 10 }                        
                            
    alertCount OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION 
  "The number of defined alert points available for query. Alerts
  are indications of the state of modules. Alerts are not configurable
  and do not send notifications"
 ::= { alert 1 }               
                  
    alertTable  OBJECT-TYPE
     SYNTAX      SEQUENCE OF AlertEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Table of active module alerts fields.
        "
     ::= { alert 2 }
                                        
 alertEntry OBJECT-TYPE
  SYNTAX      AlertEntry               
   MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
        "
        Conceptual row of the Alert Table.
        "
     INDEX       { componentListType }
     ::= { alertTable 1 }
  
 
 AlertEntry ::= SEQUENCE {  
  alertTypeName       OCTET STRING,
  alertState      Unsigned32
    }  
         

 alertTypeName OBJECT-TYPE
     SYNTAX OCTET STRING (SIZE(0..256))
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
  "
  the name of the alert
  "
 ::= { alertEntry 1 }           
               
 -- Conformance
 
 resourceConformance OBJECT IDENTIFIER ::= { resource 100 }
 
 resourceCompliances OBJECT IDENTIFIER ::= { resourceConformance 1 }
 
 resourceCompliance MODULE-COMPLIANCE
       STATUS  current
       DESCRIPTION
           "The compliance statement for systems supporting the Alpha Resource MIB."
       MODULE -- this module
           MANDATORY-GROUPS {
            alphaControllerGroup,
            alphaComponentGroup,
            alphaDataTypeGroup, 
            alphaDataGroup
           }      
        GROUP alphaConfigurationTypeGroup
        DESCRIPTION
        "   
        This group is optional. (in development)
        "  
        GROUP alphaConfigurationGroup
        DESCRIPTION
        "   
        This group is optional. (in development)
        "      
        GROUP alphaCommandTypeGroup
        DESCRIPTION
        "   
        This group is optional. (in development)
        "      
        GROUP alphaCommandGroup
        DESCRIPTION
        "   
        This group is optional. (in development)
        "          
        GROUP alphaAlarmGroup
        DESCRIPTION
        "
        This group is optional. (in development)
        "
        GROUP alphaAlertGroup
        DESCRIPTION
        "
        This group is optional. (in development)
        "
        
    ::= { resourceCompliances 1 }
 
 resourceGroups OBJECT IDENTIFIER ::= { resourceCompliances 2 }
         
 alphaControllerGroup OBJECT-GROUP
     OBJECTS {
   controllerInfoName,
   controllerInfoDescription,
   controllerInfoSoftwareVersion,
   controllerInfoOperatingSystemVersion,
   controllerInfoHardwareVersion,
   controllerExtInfoName,
   controllerExtInfoStringValue,
   controllerExtInfoUnit,
   controllerExtInfoNumberValue
  }
  STATUS   current
  DESCRIPTION
       "Alpha controller data list group."
  ::= { resourceGroups 1 }
                 
 alphaComponentGroup OBJECT-GROUP
  OBJECTS {
   componentListCount,
   componentListStaticName,
   componentListConfiguredName,
   componentListModelNumber,
   componentListSerialNumber,
   componentListSystemPointer
  }            
  STATUS   current
  DESCRIPTION
       "Component data list group."
  ::= { resourceGroups 2 }
  
 alphaDataTypeGroup OBJECT-GROUP
  OBJECTS {  
   dataListCount,
   dataListName,
   dataListUnit
  }            
  STATUS   current
  DESCRIPTION
       "Data type list group."
  ::= { resourceGroups 3 }
      
 alphaDataGroup OBJECT-GROUP
  OBJECTS {  
   dataCount, 
   dataNumberValue,
   dataStringValue
  }            
  STATUS   current
  DESCRIPTION
       "Data list group."
  ::= { resourceGroups 4 } 
  
 alphaConfigurationTypeGroup OBJECT-GROUP
  OBJECTS {  
   configurationListCount, 
   configurationListName, 
   configurationListType,
   configurationListUnit
  }            
  STATUS   current
  DESCRIPTION
       "Configuration type list group."
  ::= { resourceGroups 5 }    
  
 alphaConfigurationGroup OBJECT-GROUP
  OBJECTS {  
   configurationCount, 
   configurationStringValue,
   configurationNumberValue
  }            
  STATUS   current
  DESCRIPTION
       "Configuration list group."
  ::= { resourceGroups 6}

 alphaCommandTypeGroup OBJECT-GROUP
  OBJECTS {  
   commandListCount, 
   commandListName
  }            
  STATUS   current
  DESCRIPTION
       "Command type list group."
  ::= { resourceGroups 7}
                                      
 alphaCommandGroup OBJECT-GROUP
  OBJECTS {  
   commandCount, 
   commandTrigger
  }            
  STATUS   current
  DESCRIPTION
       "Command list group."
  ::= { resourceGroups 8}    
  
 alphaAlarmGroup OBJECT-GROUP
  OBJECTS {  
   alarmTypeCount, 
   alarmTypeName,
   alarmCount,
   alarmState
  }            
  STATUS   current
  DESCRIPTION
       "Alarm list group."
  ::= { resourceGroups 9}

 alphaAlertGroup OBJECT-GROUP
  OBJECTS {  
   alertCount, 
   alertTypeName
  }            
  STATUS   current
  DESCRIPTION
       "Alert type list group."
  ::= { resourceGroups 10}


END